Echo SRM-225 specifications Exhaust System, Spark Arrestor Screen

MAINTENANCE		SRM-225
2.	Remove air cleaner cover (A).
3.	Remove engine cover (B).	B
		A

DO NOT use a metal scraper to remove dirt from the cylinder fins.

4.Use brush to remove dirt from the cylinder fins.

5.Remove ignition wires from clip for cleaning.

6.Remove grass and leaves from the grid between the recoil starter and fuel tank.

7.Assemble components in reverse order.

Exhaust System

Spark Arrestor Screen

Level 2.

Parts Required: Spark Arrestor Screen, Gasket			F
		E
1.	Remove engine cover (B).
2.	Place piston at Top Dead Center (TDC) to prevent	D
	carbon/dirt from entering cylinder.
3.	Remove spark arrestor screen cover (C), gaskets (D), (E),			C
	and screen (F), from muffler body.
4.	Clean carbon deposits from muffler components.

Note: When cleaning carbon deposit, be careful not to damage the catalytic element inside muffler.

5.Replace screen if it is cracked, plugged, or has holes burned through.

6.Assemble components in reverse order.

24 X7722271109

© 2/2014 ECHO Inc.