Echo CS-800P instruction manual Emission Data, Handling Fuel, Emission Control

Page 15

DANGER

Fuel is very flammable. Use extreme care when mixing, storing or handling or serious personal injury may result.

Use an approved fuel container.

Do not smoke near fuel.

Do not allow flames or sparks near fuel.

Fuel tanks/cans may be under pressure.

Always loosen fuel caps slowly allowing pressure to equalize.

Never refuel a unit when the engine is hot!

Never refuel a unit with the engine running.

Do not fill fuel tanks indoors.

Always fill fuel tanks outdoors over bare ground.

Securely tighten fuel cap after refueling.

Inspect for fuel leakage.

If fuel leakage is found, do not start or operate unit until leakage is repaired.

Move at least 3 m (10 feet) from refueling location before starting the engine.

HANDLING FUEL

MIXING INSTRUCTIONS -

1.Fill an approved fuel container with half of the required amount of gasoline.

2.Add the proper amount of two-stroke oil to gasoline.

3.Close container and shake to mix oil with gasoline.

4.Add remaining gasoline, close fuel container, and remix.

IMPORTANT

ss3PILLEDLFUEL IS AFLEADING CAUSE OF HYDROCARBON emissions.

Some states may require the use of automatic fuel shut-off containers to reduce fuel spillage.

ss3TORED FUELDAGESU

Do not mix more fuel than you expect to use in thirty (30) days, ninety (90) days when a fuel stabilizer is added.

ss3TORED TWOSTROKEWFUEL MAY SEPARATE Always shake fuel container thoroughly before each use.

AFTER USE -

Do not store a unit with fuel in its tank. Leaks can occur. Return unused fuel to an approved fuel storage container.

STORAGE -

Fuel storage laws vary by locality. Contact your local government for the laws affecting your area. As a precaution, store fuel in an approved, airtight container. Store in a well-ventilated, unoccupied building, away from sparks and flames.

EMISSION DATA

EMISSION CONTROL

(EXHAUST and EVAPORATIVE) EPA 2010 and/ or C.A.R.B. TIER III

The emission control system for the engine is EM/ TWC (Engine Modification and 3-way Catalyst) and for the fuel tank the Control System is EVAP (Evaporative Emissions) or N (for nylon tank). Evaporative emission may be applicable to California models only.

An Emission Control Label is located on the engine. (This is an example only, information on label varies by engine family).

PRODUCT EMISSION DURABILITY (EMISSION COMPLIANCE PERIOD)

The 300 hours emission compliance period is the time span selected by the manufacturer certifying the engine emissions output meets applicable emissions regulations, provided that approved maintenance procedures are followed as listed in the Maintenance Section of this manual.

EMISSION CONTROL INFORMATION ENGINE FAMILY: #EHXS.0815RB DISPLACEMENT: 80.7 cc EMISSION COMPLIANCE PERIOD: 300 Hours

THIS ENGINE MEETS U.S. EPA EXH/EVP EMISSION REGULATIONS FOR MODEL YEAR * * * * REFER TO OWNER’S MANUAL FOR MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS.

* * * ? ? ? ?

13

CS-800P

Image 15
Contents X750-023 86 X750 315-230 ECHO, IncorporatedCopyright 2013 All Rights Reserved CS-800P Rules for Safe OperationOther Safety Precautions Symbols and Signs ContentsIdle speed Symbol FormStop DecalsPacking List Echo chain sawGuide bar Saw chain CS-800P Nomenclature of Parts X505-002041 Part NumberX505-006660 X524-004970 890191-31731 Part Number Manual oil pump Device for proper lubrication of chain Cleaner cover knob Device for installing Air cleaner coverOperator Safety Ansi Standard B175.1 Safety Requirement for chain sawsCorrect USE of Chain Brake Spark Arrestor MufflerPreparation for USE Guide BAR and SAW Chain INSTALLATION/REMOVALAdjusting Chain Tension Fuel and Lubricant Fuel StatementGasoline Oil Gallons US. fl. oz 160 12.8 400 Exhaust and Evaporative EPA 2010 and/ or C.A.R.B. Tier Emission DataHandling Fuel Emission ControlStart / Run OperationChain Lubricant Cap indicationfiring sound, pull throttle trigger to release choke When the Engine is ColdWhen the Engine is Warm Choke openChain Lubrication Test RunningStopping Checking Chain TensionCutting Instruction GeneralKickback Felling the Tree Limbing BuckingUphill position Finish cut First cut Board or flat stones Chain brake unlock Testing the BrakeChain Brake Operation Chain brake functionStop the engine Automatic Chain BrakeChain and Guide BAR Combination Guide BARSAW Chain Skill Levels Maintenance and CareMaintenance Intervals Component / system Maintenance procedureTurn screw out, CCW, an additional ¼ turn Carburetor AdjustmentIdle adjusting screw High speed needle H Low speed needle L Cutting attachment must not move when unit is idlingFuel Filter AIR FilterCheck Fuel System Spark PlugAutomatic Oiler SprocketCylinder Fins Muffler Spark ArrestorSetting the SAW Chain Setting SAW ChainHold the file tipped 10 upward CS-800P Troubleshooting ProblemCause Remedy Technical Data Storage After USESs 3TOREOIN a DRY Area Freerfrom DUST Exceptions Warranty StatementsC30812001001/C30812999999

CS-800P specifications

The Echo CS-800P is a powerful chainsaw specifically designed for professional users who require reliable performance and durability in challenging environments. This model exemplifies the brand's commitment to high-quality engineering and cutting-edge technologies, making it a preferred choice among arborists, landscapers, and forestry professionals.

At its core, the CS-800P features a robust 80.0 cc professional-grade, 2-stroke engine. This high-performance engine produces an impressive output of 5.7 horsepower, allowing users to tackle even the toughest cutting jobs with ease. The power-to-weight ratio is optimized to ensure maximum efficiency without compromising maneuverability. Weighing in at approximately 14.7 pounds, this chainsaw balances power and control, ensuring that users can operate it comfortably during extended periods.

One of the main highlights of the CS-800P is its innovative vibration-dampening technology. This feature minimizes operator fatigue by drastically reducing the amount of vibration transferred to the user during operation. The chainsaw is equipped with a heavy-duty air filtration system that extends the engine’s life by preventing dust and debris from entering, ensuring cleaner air intake and optimal performance.

The CS-800P comes with a 20-inch guide bar and is compatible with various cutting chains, allowing users to customize their setup for different applications. This versatility is further enhanced by the chainsaw's advanced lubrication system, which automatically delivers oil to the chain and bar for seamless operation, reducing wear and increasing chain longevity.

Another significant aspect of the Echo CS-800P is its user-friendly design. The chainsaw features an easy-to-access chain tensioning system that allows users to adjust the chain quickly without the need for additional tools. This feature enhances productivity, enabling users to spend less time on maintenance and more time on their cutting tasks.

Safety is also a priority in the design of the CS-800P. The chainsaw is equipped with a chain brake system that activates when kickback occurs, providing an added layer of protection for the operator. The front handle is ergonomically designed to offer a secure grip, while the rear handle allows for easy maneuvering and control.

In conclusion, the Echo CS-800P is a powerful, reliable, and feature-rich chainsaw designed for professional users who demand top performance in their equipment. With its advanced technologies, user-friendly features, and robust design, it stands out as an exceptional choice for anyone in need of a high-quality chainsaw that can handle the rigors of demanding tasks. Whether for heavy-duty woodcutting or general landscaping work, the CS-800P proves to be an invaluable tool for professionals in the field.