Echo CS-800P instruction manual C30812001001/C30812999999

Page 34

PURCHASED REPAIR PARTS, SHORT BLOCKS AND ACCESSORIES

ssDAY RESIDENTIAL SOR NONINCOMEAPRODUCINGRWARRANTY

ssDAY COMMERCIAL INSTITUTIONAL LAGRICULTURAL IINDUSTRIAL NINCOMEOPRODUCING ORDRENTAL APPLICATION WARRANTY

ATTENTION TWO-STROKE ENGINE POWER PRODUCT OWNERS

This ECHO two-stroke engine power product is a quality-engineered unit which has been manufactured to exact tolerances to provide superior performance. To help ensure the performance of the unit, it is required to use two-stroke oil which meets the ISO-L- EGD Standard per ISO/CD 13738 and JASO M345-FC/FD Standards. ECHO Power Blend X™ Two-Stroke Oil is a premium two- stroke oil specifically formulated to meet ISO-L-EGD (ISO/CD 13738) and JASO M345-FC/FD Standards. The use of two-stroke oils designed for other applications, such as for outboard motors or lawnmowers can result in severe engine damage, and will void your two-stroke engine limited warranty.

THIS WARANTY DOES NOT COVER DAMAGE CAUSED BY:

ss,ACK OFKLUBRICATIONUOR ENGINEAFAILURE DUE TO THENUSEIOF TWOSTROKE OILSEthat do not meet the ISO-L-EGD (ISO/CD 13738) and JASO M345-FC/FD Standards. Engine problems due to inadequate lubrication caused by failure to use an ISO-L-EGD compliant and JASO M345-FC/FD registered oil, will void the two-stroke engine limited warranty. ECHO Power Blend X™ Two-Stroke Oil meets the ISO-L-EGD and JASO M345-FC/FD Standard. Emission related parts are covered for 5 years residential use or 2 years commercial use regardless of two-stroke oil used, per the statement listed in the EPA or California Emission Defect Warranty Explanation.

ss$AMAGE CAUSED BY USE OFEGASOHOL CONTAININGOMETHANOL WOOD ALCOHOL OOR GASOLINERCONTAINING less than 89 octane. Only use gasoline which contains 89 octane or higher. Gasohol which contains a maximum 10 % ethanol (grain alcohol) or 15 % MTBE (methyl/ tertiary/butyl/ether) is also approved. The prescribed mixing ratio of gasoline to oil is listed on the ECHO oil label and covered in

your operator’s manual.

ss%NGINE DAMAGE CAUSED BYGUSE OF ETHER ORDANYBSTARTING mUIDS

ss$AMAGE CAUSED BY TAMPERING WITHYENGINE SPEED GOVERNOR OR EMISSION COMPONENTS ORORUNNINGTENGINESOABOVERSPECIlED AND recommended engine speeds as listed in your operator’s manual.

ss/PERATIONAOF THE UNITOWITH IMPROPERLYNMAINTAINEDREMOVED CUTTINGNSHIELD ORIREMOVEDDAMAGEDRAIRMlLTER

ss$AMAGE CAUSED BY DIRT PRESSUREYOR STEAM CLEANINGRTHESUNIT RSALTLWATER CORROSION RUST RVARNISH ABRASIVES UANDTMOISTURE

ss$EFECTS MALFUNCTIONSAOR FAILURESTRESULTING FROM ABUSE IMISUSE NEGLECT GMODIlCATIONS MALTERATIONS NORMALNWEAR IMPROPER SERVICING or use of unauthorized attachments.

ss)NCORRECTRSTORAGETPROCEDURES ASTALE FUEL OINCLUDINGRFAILURE TOOPROVIDEOOR PERFORM REQUIREDEMAINTENANCE SERVICES ASRPRESCRIBEDDIN THE operator’s manual. Preventative maintenance as outlined in the operator’s manual is the customer’s responsibility.

ss&AILURES DUE TOSIMPROPER SETUP PREDELIVERYESERVICEEOR REPAIR SERVICE BYVANYONE OTHER THANNAUTHORIZED %#(/HSERVICINGHDEALERR during the warranty period.

ss#ERTAINTparts and other items are not warranted, including but not limited to: lubricants, starter cords, and engine tune-ups. ss5SE5OF SPARK PLUGS OTHER THANPTHOSEGMEETINGTPERFORMANCEHANDNDURABILITYIREQUIREMENTS OFQTHEI/%-ESPARKNPLUG LISTED IN THE

Operator’s Manuals.

ss/VERHEATINGEOR CARBONGSCORING FAILURES DUE TOSRESTRICTED GCLOGGED EXHAUST PORTAOR COMBUSTIONRCHAMBER INCLUDING DAMAGEITO SPARKR arrester screen.

ss!DJUSTMENTSTAFTERNTHESlRST  ETHIRTY DAYS ANDRBEYOND SUCH AS CARBURETORBADJUSTMENT AND THROTTLESCABLEEADJUSTMENT

ss$AMAGE TOGGEARSTOR GEARECASESSCAUSED BYGCONTAMINATED GREASE ORROIL USE OF INCORRECTOTYPE ORNVISCOSITYEOF LUBRICANTS ANDOR FAILURE to comply with recommended grease or oil change intervals.

ss$AMAGE CAUSED BY LOADING 3(2%$ @. 6!#§ABEYOND RECOMMENDED CAPACITY

ss$AMAGE CAUSED BY PUMPSOR SPRAYER RUNNING DRY OPUMPINGPOR SPRAYING CAUSTIC ORUmAMMABLE MATERIALS AOR LACKBOF OR BROKEN strainers.

ss!DDITIONAL DAMAGEATO PARTS ORACOMPONENTS DUE TORCONTINUEDRUSE AFTER OPERATIONAL PROBLEM OROFAILURE OCCURSB3HOULD OPERATIONALL problem or failure occur, the product should not be used, but delivered as is to an authorized ECHO servicing dealer.

It is a dealer’s and/or customer’s responsibility to complete and return the warranty registration card supplied with your ECHO product or by visiting WWW.ECHO-USA.COM. Your receipt of purchase including date, model and serial number must be maintained and presented to an authorized ECHO servicing dealer for warranty service. Proof of purchase rests solely with the customer. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so you may also have other specific legal rights which vary from state to state. This limited warranty is given by ECHO Incorporated, 400 Oakwood Rd., Lake Zurich, IL 60047.

DISCLAIMER OF IMPLIED WARANTIES

This limited warranty is in lieu of all other expressed or implied warranties, including any warranty of FITNESS FOR A PARTICULAR PURPOSE OR USE and any implied warranty of MERCHANTABILITY otherwise applicable to this product. ECHO and its affiliated companies shall not be liable for any special incidental or consequential damage, including lost profits. There are no warranties extended other than as provided herein. This limited warranty may be modified only by ECHO.

CS-800P

32

C30812001001/C30812999999

 

 

Page 33 Page 34
Image 34
Page 33 Page 34
Contents ECHO, Incorporated X750-023 86 X750 315-230Copyright 2013 All Rights Reserved Rules for Safe Operation CS-800POther Safety Precautions Contents Symbols and SignsDecals Symbol FormStop Idle speedEcho chain saw Packing ListGuide bar Saw chain CS-800P X505-002041 Part Number Nomenclature of PartsX505-006660 X524-004970 890191-31731 Part Number Cleaner cover knob Device for installing Air cleaner cover Manual oil pump Device for proper lubrication of chainOperator Safety Spark Arrestor Muffler Safety Requirement for chain sawsCorrect USE of Chain Brake Ansi Standard B175.1Guide BAR and SAW Chain INSTALLATION/REMOVAL Preparation for USEAdjusting Chain Tension Fuel Statement Fuel and LubricantGasoline Oil Gallons US. fl. oz 160 12.8 400 Emission Control Emission DataHandling Fuel Exhaust and Evaporative EPA 2010 and/ or C.A.R.B. TierCap indication OperationChain Lubricant Start / RunChoke open When the Engine is ColdWhen the Engine is Warm firing sound, pull throttle trigger to release chokeChecking Chain Tension RunningStopping Chain Lubrication TestGeneral Cutting InstructionKickback Felling the Tree Bucking LimbingUphill position Finish cut First cut Board or flat stones Chain brake function Testing the BrakeChain Brake Operation Chain brake unlockAutomatic Chain Brake Stop the engineGuide BAR Chain and Guide BAR CombinationSAW Chain Component / system Maintenance procedure Maintenance and CareMaintenance Intervals Skill LevelsCutting attachment must not move when unit is idling Carburetor AdjustmentIdle adjusting screw High speed needle H Low speed needle L Turn screw out, CCW, an additional ¼ turnSpark Plug AIR FilterCheck Fuel System Fuel FilterMuffler Spark Arrestor SprocketCylinder Fins Automatic OilerSetting SAW Chain Setting the SAW ChainHold the file tipped 10 upward CS-800P Problem TroubleshootingCause Remedy Storage After USE Technical DataSs 3TOREOIN a DRY Area Freerfrom DUST Warranty Statements ExceptionsC30812001001/C30812999999

CS-800P specifications

The Echo CS-800P is a powerful chainsaw specifically designed for professional users who require reliable performance and durability in challenging environments. This model exemplifies the brand's commitment to high-quality engineering and cutting-edge technologies, making it a preferred choice among arborists, landscapers, and forestry professionals.

At its core, the CS-800P features a robust 80.0 cc professional-grade, 2-stroke engine. This high-performance engine produces an impressive output of 5.7 horsepower, allowing users to tackle even the toughest cutting jobs with ease. The power-to-weight ratio is optimized to ensure maximum efficiency without compromising maneuverability. Weighing in at approximately 14.7 pounds, this chainsaw balances power and control, ensuring that users can operate it comfortably during extended periods.

One of the main highlights of the CS-800P is its innovative vibration-dampening technology. This feature minimizes operator fatigue by drastically reducing the amount of vibration transferred to the user during operation. The chainsaw is equipped with a heavy-duty air filtration system that extends the engine’s life by preventing dust and debris from entering, ensuring cleaner air intake and optimal performance.

The CS-800P comes with a 20-inch guide bar and is compatible with various cutting chains, allowing users to customize their setup for different applications. This versatility is further enhanced by the chainsaw's advanced lubrication system, which automatically delivers oil to the chain and bar for seamless operation, reducing wear and increasing chain longevity.

Another significant aspect of the Echo CS-800P is its user-friendly design. The chainsaw features an easy-to-access chain tensioning system that allows users to adjust the chain quickly without the need for additional tools. This feature enhances productivity, enabling users to spend less time on maintenance and more time on their cutting tasks.

Safety is also a priority in the design of the CS-800P. The chainsaw is equipped with a chain brake system that activates when kickback occurs, providing an added layer of protection for the operator. The front handle is ergonomically designed to offer a secure grip, while the rear handle allows for easy maneuvering and control.

In conclusion, the Echo CS-800P is a powerful, reliable, and feature-rich chainsaw designed for professional users who demand top performance in their equipment. With its advanced technologies, user-friendly features, and robust design, it stands out as an exceptional choice for anyone in need of a high-quality chainsaw that can handle the rigors of demanding tasks. Whether for heavy-duty woodcutting or general landscaping work, the CS-800P proves to be an invaluable tool for professionals in the field.
Top Page Image Contents