Echo CS-800P instruction manual Cutting Instruction, General, Kickback

Page 19

CUTTING INSTRUCTION

Kickback

GENERAL

CAUTION

•Read the ECHO “CHAIN SAW SAFETY

MANUAL” included with your chain saw for additional cutting and safety instructions.

•Wear suitable hearing protection such as earmuffs or earplugs to protect against objectionable or uncomfortable loud noises.

•Do not let the tip of the bar touch anything while the engine is running.

At cutting speed the chain is moving at a high rate of speed.

Should the tip contact a limb or log while the chain is moving, the tip will be pushed upward with considerable force.

This is known as kickback. Avoid it!

In all circumstances the operation of the chain saw is a one-man job.

It is difficult at times to take care for your own safety, so don’t assume the responsibility for a helper as well.

After you have learned the basic techniques of using the saw, your best aid will be your own good common sense.

The accepted way to hold the saw is to stand to the left of the saw with your left hand on the front handlebar and your right hand on the rear handle so you can operate the throttle trigger with your right index finger.

Before attempting to fell a tree, cut some small logs or limbs.

Become thoroughly familiar with the controls and the responses of the saw.

Start the engine, see that it is running properly. Squeeze the trigger to open the throttle wide open and start the cut. If the chain is properly sharpened, the cutting should be relatively effortless.

It is not necessary to press down hard to make the saw cut.

Pushing the saw too hard will slow the engine and cutting will actually be more difficult.

Some material may adversely affect the housings of your chain saw.

(Example palm Tree Acid, fertilizer etc.)

To avoid housing deterioration, carefully remove all packed sawdust around clutch and guide bar area and wash with water. Coat metal parts with light oil.

17

CS-800P

Page 18 Page 20
Image 19
Page 18 Page 20
Contents X750-023 86 X750 315-230 ECHO, IncorporatedCopyright 2013 All Rights Reserved CS-800P Rules for Safe OperationOther Safety Precautions Symbols and Signs ContentsIdle speed Symbol FormStop DecalsEcho chain saw Packing ListGuide bar Saw chain CS-800P X505-002041 Part Number Nomenclature of PartsX505-006660 X524-004970 890191-31731 Part Number Manual oil pump Device for proper lubrication of chain Cleaner cover knob Device for installing Air cleaner coverOperator Safety Ansi Standard B175.1 Safety Requirement for chain sawsCorrect USE of Chain Brake Spark Arrestor MufflerPreparation for USE Guide BAR and SAW Chain INSTALLATION/REMOVALAdjusting Chain Tension Fuel Statement Fuel and LubricantGasoline Oil Gallons US. fl. oz 160 12.8 400 Exhaust and Evaporative EPA 2010 and/ or C.A.R.B. Tier Emission DataHandling Fuel Emission ControlStart / Run OperationChain Lubricant Cap indicationfiring sound, pull throttle trigger to release choke When the Engine is ColdWhen the Engine is Warm Choke openChain Lubrication Test RunningStopping Checking Chain TensionGeneral Cutting InstructionKickback Felling the Tree Bucking LimbingUphill position Finish cut First cut Board or flat stones Chain brake unlock Testing the BrakeChain Brake Operation Chain brake functionStop the engine Automatic Chain BrakeGuide BAR Chain and Guide BAR CombinationSAW Chain Skill Levels Maintenance and CareMaintenance Intervals Component / system Maintenance procedureTurn screw out, CCW, an additional ¼ turn Carburetor AdjustmentIdle adjusting screw High speed needle H Low speed needle L Cutting attachment must not move when unit is idlingFuel Filter AIR FilterCheck Fuel System Spark PlugAutomatic Oiler SprocketCylinder Fins Muffler Spark ArrestorSetting SAW Chain Setting the SAW ChainHold the file tipped 10 upward CS-800P Problem TroubleshootingCause Remedy Storage After USE Technical DataSs 3TOREOIN a DRY Area Freerfrom DUST Exceptions Warranty StatementsC30812001001/C30812999999

CS-800P specifications

The Echo CS-800P is a powerful chainsaw specifically designed for professional users who require reliable performance and durability in challenging environments. This model exemplifies the brand's commitment to high-quality engineering and cutting-edge technologies, making it a preferred choice among arborists, landscapers, and forestry professionals.

At its core, the CS-800P features a robust 80.0 cc professional-grade, 2-stroke engine. This high-performance engine produces an impressive output of 5.7 horsepower, allowing users to tackle even the toughest cutting jobs with ease. The power-to-weight ratio is optimized to ensure maximum efficiency without compromising maneuverability. Weighing in at approximately 14.7 pounds, this chainsaw balances power and control, ensuring that users can operate it comfortably during extended periods.

One of the main highlights of the CS-800P is its innovative vibration-dampening technology. This feature minimizes operator fatigue by drastically reducing the amount of vibration transferred to the user during operation. The chainsaw is equipped with a heavy-duty air filtration system that extends the engine’s life by preventing dust and debris from entering, ensuring cleaner air intake and optimal performance.

The CS-800P comes with a 20-inch guide bar and is compatible with various cutting chains, allowing users to customize their setup for different applications. This versatility is further enhanced by the chainsaw's advanced lubrication system, which automatically delivers oil to the chain and bar for seamless operation, reducing wear and increasing chain longevity.

Another significant aspect of the Echo CS-800P is its user-friendly design. The chainsaw features an easy-to-access chain tensioning system that allows users to adjust the chain quickly without the need for additional tools. This feature enhances productivity, enabling users to spend less time on maintenance and more time on their cutting tasks.

Safety is also a priority in the design of the CS-800P. The chainsaw is equipped with a chain brake system that activates when kickback occurs, providing an added layer of protection for the operator. The front handle is ergonomically designed to offer a secure grip, while the rear handle allows for easy maneuvering and control.

In conclusion, the Echo CS-800P is a powerful, reliable, and feature-rich chainsaw designed for professional users who demand top performance in their equipment. With its advanced technologies, user-friendly features, and robust design, it stands out as an exceptional choice for anyone in need of a high-quality chainsaw that can handle the rigors of demanding tasks. Whether for heavy-duty woodcutting or general landscaping work, the CS-800P proves to be an invaluable tool for professionals in the field.
Top Page Image Contents