Marantz DR6000 manual To start recording, press Play on the selected source

RECORDING

The numbers between parentheses refer to the fold-out.

CD RECORDER DR6000
REC TYPE	REW	FF	STOP	PLAY/PAUSE
OPEN/CLOSE
Recordable
ReWritable
	EASY JOG

POWER ON/OFF

LEVELPHONES

DISPLAY	SCROLL				REC
	SOURCE	ERASE	STORE	CANCEL	FINALIZE
			MENU	DELETE
					PUSH ENTER

ABC DEF GHI

1 2 3

JKL MN OPQ

4 5 6

RST UVW XYZ

7 8 9

DISPLAY SPACE SCROLL

0

FUNCTION

CDRCD

y

ENGLISH

e r

CD-SYNC

The CD-SYNC feature enables you to make fast and easy re- cordings of a CD. Track increments are automatically detected from the source material. Track increments cannot be added manually. In analog source material a silence of 2.7 seconds or more is automatically detected as a track increment.

1Make sure the disc is absolutely free of scratches and dust particles.

2Connect the cable from an external CD player to the CD- Recorder. (see INSTALLATION page 5 and 6.)

3Press SOURCE (7) repeatedly until the selected source, appears on the display (depending on the digital connec- tion used):

➔	,	or	lights up and	,
		or	appears on the display.

y	MENU/	CANCEL/
	STORE	DELETE
		ENTER

5To start recording, press PLAY on the selected source.

➔The CD-Recorder automatically starts to record. The re- cording time left appears on the display.

•If, however, you start the source during a track, CD- SYNC recording starts at the beginning of the next track or after 2.7 seconds of silence in analog recordings.

•To check the elapsed recording time, press DISPLAY (4, 58). (This can also be done during recording)

•The recorder stops automatically.

6To stop recording manually, press 9 STOP (17, 68).

•If 9 STOP (17, 68) was pressed within 3 seconds after pressing PLAY on the selected source, no recording will take place.

•To interrupt recording, press 2/; PLAY/PAUSE (16) or ; PAUSE (63).

To resume, press 0 REC (13) on the CD-Recorder.

After recording the display will show	for sev-
eral seconds.

4With the CD-Recorder stopped, press REC TYPE (20).

once: to select ‘				’;
twice: to select ‘					’;
four times: to select ‘			’;
➔	and	start to flash.

Note:

-Recordings from DAT, DCC or analog sources will only stop after 20 seconds silence.

-MAKE CD is a recording mode for auto finalized after syn- chronized recording. It takes about 1 minute to start auto fi- nalizing after finish recording the last track. (WAIT appears on the display.) If you press 9 STOP (17, 68) during WAIT on the display, auto finalizing will be canceled.

Important:

If you want to play the recorded CD-R(W) disc on any regu- lar CD player, it must first be finalized. See finalizing discs.

Finalized CD-RW discs play only on CD-RW compatible CD players.

9

DR6000(U)_Eng_P01-10.p65 9 8/7/00, 1:35 PM