Marantz DR6000 manual Using the Recorder, Switching on and OFF, Using the remote control

USING THE RECORDER

The numbers between parentheses refer to the fold-out.

Switching ON and OFF

1 Connect the power cord into the mains.

AC IN

q

2Press the POWER ON/OFF (1) button on the front of the CD-Recorder to turn it on or off.

	CD RECORDER DR6000
		OPEN/CLOSE
	Recordable
	ReWritable
STANDBY
POWER	ON/OFF
	DISPLAY	SCROLL

Inserting discs ENGLISH

1Press / OPEN/CLOSE (6) to open the disc tray.

➔ lights up.

2Insert a CD, CD-R or CD-RW in the appropriate recess in the tray, label side up.

3Press / OPEN/CLOSE (6) to close the tray.

➔	lights up, followed by	and the dis-
	play will show the type of disc you inserted.

w

Using the remote control

1Open the battery compartment cover.

2Insert 2 batteries (AA, LR-6 or UM-3; as supplied) as shown.

3Replace the cover.

•If a CD-R(W) is finalized it will show CD on the display.

•If CD-text is available the TITLE/ARTIST will scroll by.

Note:

-	Only Audio CDs will be accepted. If a non-audio disc is
	inserted, the display shows	.
- For recording it is important that the blank disc is completely
	free from dust particles or scratches. (see Compact Discs
	page 1).
-	If you insert a blank or partly-recorded CD-R or unfinalized
	CD-RW, the CD-Recorder will calibrate the disc for optimum
	recording. During this process the display will first show
Note:	and then the number of audio tracks.
	Calibration can take up to 25 seconds.

-We recommend you use 2 batteries of the same type and

condition.

- Always point the remote control directly towards the re-

corder and make sure there.

This remote control can switch “STANDBY ON/OFF” but can- not switch “POWER ON/OFF” the CD-Recorder.

Batteries contain chemical substances, so they should be disposed of properly.

7

DR6000(U)_Eng_P01-10.p65 7 8/7/00, 1:35 PM