ENGLISH
OTHER INFORMATIONS
The numbers between parentheses refer to the
Player does not react
•use the POWER ON/OFF (1) button on the front of the Player to switch it off and back on
on display
•a power failure has occurred during recording the CD- Recorder is attempting to repair the disc
• Ifthen appears on the display, the disc cannot be recorded further, and cannot be finalized. But it can still be played on the
•on a
20
CD RECORDER DR6000 |
|
|
|
REC TYPE | REW | FF | STOP |
OPEN/CLOSE |
|
|
|
Recordable |
|
|
|
ReWritable |
|
|
|
| EASY JOG |
|
|
POWER | ON/OFF |
|
|
|
|
|
| DISPLAY | SCROLL |
|
|
| REC |
|
| SOURCE | ERASE | STORE | CANCEL | FINALIZE |
|
|
|
| MENU | DELETE |
|
|
|
|
|
|
| PUSH ENTER |
qwe | w w |
Diagnostic Program
If the malfunction continues, perform the Diagnostic Program:
1Switch the recorder off using the POWER ON/OFF (1).
2Simultaneously press the R (18) and Q (19) and switch the recorder back on using the POWER ON/OFF (1).
➔ The display will now indicate ‘ | ’. |
➔After a few minutes, the message will change to
‘ | ’ or ‘ | ’. |
➔ If the |
| message appears, your recorder is defec- |
tive and needs to be repaired. Consult your supplier or call the Marantz Consumer Line to find the nearest serv- ice centre. The number of the Consumer Line can be found in the guarantee booklet.
➔If the ‘ ’ message appears, there is no clear defect and the malfunction may be a result of misinter- pretation of the user instructions, an inappropriate disc, a mechanical defect or an incorrect connection. To solve this problem, carefully read the user instructions once again; you can also contact your supplier.
➔If you cannot solve the problem, go to the nearest serv- ice centre.
3Switch off the recorder using the POWER ON/OFF (1) to exit from the Diagnostic Program.
20 | 8/7/00, 1:37 PM |