OPERATION |
Remove Blower Pipes
1.Insert screwdriver (F) into hole located near lock symbol (G) to release pipe lock.
Screwdriver tip may stick out opposite side of locking hole.
2.Pull pipe out of fan case.
3.Remove screwdriver.
G
F
OPERATION
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit.
Blower housing may contain shredder blades and other sharp edges that can cause serious injuries if touched, even if engine is off and blades are not moving. Wear gloves to protect hands from sharp edges and hot surfaces.
Operation of this equipment may create sparks that can start fires. This unit is equipped with a spark arrestor to prevent discharge of hot particles from the engine. Metal blade use also can create sparks if the blade strikes rocks, metal, or other hard objects. Contact local fire authorities for laws or regulations regarding fire prevention requirements.
X7501183303 | 13 |
© 3/2013 ECHO Inc.