Marantz CDR631 manual To start recording, press Play on the selected source

ENGLISH

RECORDING

The numbers between parentheses refer to the fold-out.

ABC DEF GHI

1 2 3

JKL MN OPQ

4 5 6

RST UVW XYZ

7

8

9

DISPLAY

SPACE

SCROLL

CD RECORDER CDR631

0

REC MODE

TR.INCR.

RANDOM

REPEAT

IR

FUNCTION

DELETE

STORE

CDR

CD

FINAL

ERASE

CANCL

MENU

Recordable

ReWritable

TIME

1

2

3

4

5

PROG

y

POWER

STANDBY

HEADPHONE

LEVEL

6

8

9

0

INPUT

TEXT

7

REC LEVEL/SELECT

0

10

PUSH ENTER

er	y	MENU/	ENTER
			CANCEL/
		STORE	DELETE

CD-SYNC

The CD-SYNC feature enables you to make fast and easy re- cordings of a CD. Track increments are automatically detected from the source material. Track increments cannot be added manually. In analog source material a silence of 2.7 seconds or more is automatically detected as a track increment.

1Make sure the disc is absolutely free of scratches and dust particles.

2Connect the cable from an external CD player to the CD- Recorder. (see INSTALLATION from page 5 to 7.)

3Press INPUT (10) repeatedly until the selected source, appears on the display (depending on the digital connec- tion used):

➔	,	or	lights up and	,
		or	appears on the display.

5To start recording, press PLAY on the selected source.

➔The CD-Recorder automatically starts to record. The re- cording time left appears on the display.

•If, however, you start the source during a track, CD- SYNC recording starts at the beginning of the next track or after 2.7 seconds of silence in analog recordings.

•To check the elapsed recording time, press TIME (7) or DISPLAY (71). (This can also be done during recording)

•The recorder stops automatically.

6To stop recording manually, press 9 (13, 81).

•If 9 (13, 81) was pressed within 3 seconds after pressing PLAY on the selected source, no recording will take place.

•To interrupt recording, press 2/; (14) or ; (76). To resume, press 0 (12) on the CD-Recorder.

After recording the display will show	for sev-
eral seconds.

4With the CD-Recorder stopped, press REC MODE (26).

once: to select ‘			’
twice: to select ‘			’
four times: to select ‘			’ (When ANALOG was se-
	lected, this menu dose not appear on the dis-
	play.
➔	and	start to flash.

Note:

-Recordings from DAT, DCC or analog sources will only stop after 20 seconds silence.

-MAKE CD is a recording mode for auto finalized after syn- chronized recording. It takes about 1 minute to start auto fi- nalizing after finish recording the last track. (WAIT appears on the display.)

-The recorded sound might be distorted when you adjust the recording level to set above 0dB for digital recording and - 12dB for analog recording. The default setting of recvolume for digital is 0dB and analog is -12dB when this CD-Recorder is shipped.

Important:

If you want to play the recorded CD-R disc on any regular

CD player, it must first be finalized. See finalizing discs.

Finalized CD-RW discs play only on CD-RW compatible CD players.

•If or flashes, the digital connection is incor- rect.

Note:

You can adjust the recording level by rotating the REC LEVEL/

SELECT (19).

DIGITAL RECORDING : +6dB ~ –63dB

ANALOG RECORDING : 0dB ~ –63dB

10