Echo CS-355T instruction manual Description

Page 14

DESCRIPTION

CS-355T

 

 

1.Chain Brake Lever/Front hand guard - Guard between the front handle and the saw chain for protecting the hand from injuries and aiding in control of the chain saw if the hand slips off the handle.

2.Tip guard - Anti-kickback device attached to the bar nose.

3.Saw chain - Chain, serving as a cutting tool.

4.Guide bar - The part that supports and guides the saw chain.

5.Spiked bumper - Device, fitted in front of the guide bar mounting point, acting as a pivot when in contact with a tree or log.

6.Chain catcher - A projection designed to reduce the risk of the operator’s right hand from being hit by a chain which has broken or derailed from the guide bar during cutting.

7.Chain tension adjuster - Device to adjust chain tension.

8.Chain Brake/Sprocket Guard - Protective cover for the chain brake, guide bar, saw chain, clutch, and sprocket when the chain saw is in use.

9.Muffler Cover - Cover the muffler to protect operator from hot surface of muffler.

10.Palm Rest - Supports hand while holding saw. Choose comfortable size: orange for smaller hand, white for larger hand. Install orange plug if Palm Rest is not used.

11.Rear handle (for the right hand) - Support handle located on the top of the engine housing.

12.Control lever (choke/ignition switch) - Device for connecting and disconnecting the ignition system and allowing the engine to be started or stopped. Lever also activates choke.

13.Throttle trigger lockout - A safety lever which must be depressed before the throttle trigger can be activated. Prevents accidental operation of the throttle trigger.

14.Throttle trigger - Device activated by the operator’s finger, for controlling the engine speed. Also releases fast idle throttle latch when squeezed and released immediately after starting engine.

15.Purge pump - When starting engine, push purge pump 3 or 4 times.

16.Air cleaner cover - Covers air cleaner.

17.Cleaner cover knob - Device for installing the air cleaner cover.

18.Spark plug - Provides spark to ignite fuel mixture.

19.Starter handle - Pull handle slowly until starter engages then quickly and firmly. When engine starts, return handle slowly. DO NOT let handle snap back or damage to unit will occur.

20.Oil tank cap - For closing the oil tank.

21.Fuel tank cap - For closing the fuel tank.

22.Front handle (for the left hand) - Support handle located at the front of the engine housing.

23.Safety Lanyard - If working off the ground the operator must be trained in safe climbing techniques and use of all recommended safety equipment.

CHAIN SAW TERMS

1.Fast Idle -Throttle setting that causes engine to operate at a faster speed for easier starting.

2.Throttle Latch - Device that sets idle speed to fast idle when choke control is operated.

3.Chain Brake - Stops the saw chain.

4.Drive Sprocket - Drives saw chain.

5.Clutch - Turns drive sprocket when engine rpm is fast enough to provide the power needed for cutting.

14

X7503320105

© 09/2013 ECHO Inc.

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Chain SAW Burn HazardTable of Contents Packing List CS-355TSafety Rules For Safe OperationCorrect Use Of Chain Brake Chain Brake OperationOther Safety Precautions Automatic Chain BrakeCS-355T Personal Condition and Safety Equipment Vibration and Cold Repetitive Stress InjuriesSafety Symbols and Signs Hot SurfaceEPA 2010 and Later and/or C.A.R.B. Tier Manual Safety Symbols and Important InformationEmission Control Exhaust / Evaporative Product Emission Durability Emission Compliance PeriodDescription Description Tip Guard To Bar Instructions Guide Bar And Saw Chain-Install/removePreparation For Use Adjusting Chain Tension Fuel Requirements OperationFuel Handling Fuel After useChain Lubricant Starting Cold Engine Starting Warm Engine RunningChain Lubrication Test StoppingChecking Chain Tension Cutting InstructionsKickback Felling the Tree LimbingBucking Saw Chain Chain And Guide Bar CombinationGuide Bar Skill Levels MaintenanceMaintenance Intervals Carburetor Adjustment Engine Break-InCheck Fuel System Air FilterSpark Plug Fuel FilterSprocket Automatic OilerOil Filter Cooling System Cleaning Spark Arrestor MufflerExhaust Port Cleaning LevelSetting The Saw Chain Setting Saw ChainMaintenance Troubleshooting Engine Problem Troubleshooting ChartStorage Storage After UseTechnical Data NGK BPM8YWarranty Statements OWNER’S ResponsibilityWarranty Statements CS-355T CS-355T CS-355T Servicing Information ServiceWarranty Registration Additional or Replacement Manuals Parts/Serial NumberECHO, Incorporated

CS-355T specifications

The Echo CS-355T is a powerful and versatile chainsaw designed for both professional loggers and homeowners seeking efficient tree maintenance solutions. Known for its performance and user-friendly design, this chainsaw combines advanced technologies with craftsmanship to deliver a tool that meets various cutting needs.

One of the standout features of the Echo CS-355T is its robust engine. Powered by a 35.8cc professional-grade two-stroke engine, it balances power and weight effectively. This engine provides ample torque for cutting through tough timber while maintaining impressive fuel efficiency. The chainsaw runs on a mixture of gasoline and oil, giving users the power they need without adding excessive weight.

The CS-355T is equipped with a 14-inch guide bar, ideal for pruning, limbing, and felling small to medium-sized trees. The guide bar, combined with a low-kickback chain, enhances safety and control during use. This makes the CS-355T a reliable choice for both novices and experienced users who need a manageable yet capable saw.

User comfort and convenience are paramount in the design of the Echo CS-355T. The chainsaw features an ergonomic handle, which reduces vibration and provides a firm grip, allowing for extended use without fatigue. Additionally, the tool-less air filter and spark plug cover allow for easy maintenance and quick access to essential components, ensuring minimal downtime.

One of the innovative technologies incorporated in the Echo CS-355T is the proprietary i-30 starting system. This technology allows for easier and quicker starting, which is especially beneficial during cold weather conditions. The chainsaw also boasts a unique automatic oiler system that ensures optimal lubrication of the chain and bar, extending the life of these critical components.

In terms of build quality, the Echo CS-355T showcases a durable construction with high-quality materials, offering reliability even under rigorous use. It's designed for ease of handling and incorporates a chain brake for added safety, providing peace of mind while operating the saw.

In summary, the Echo CS-355T is an impressive chainsaw that stands out for its combination of power, lightweight design, and user-friendly features. Whether you are a professional in the forestry industry or a homeowner tackling yard work, the CS-355T offers the performance and reliability needed for various cutting tasks. With its advanced technology and ergonomic design, it is a valuable addition to any outdoor tool collection.
Top Page Image Contents