Echo CS-355T instruction manual Bucking

Page 25

CS-355T

OPERATION

 

 

Don’t cut with the saw overhead or aligned vertically with your body. If the saw should kickback, you may not have enough control to prevent possible injury.

Bucking

Bucking is the sawing of a log or fallen tree into smaller pieces. There are a few basic rules which apply to all bucking operations.

•Keep both hands on the handles at all times.

•Support logs if possible.

•When cutting on a slope or hillside, always stand uphill.

Keep in mind that the wood is heavy and that it will bend and pinch the saw if improperly supported. The trunk will weaken at the point where you make the cut unless the tree is lying on perfectly flat ground or supported as shown. If you make the cut with the tree on the ground, don’t let the saw’s chain dig into the earth; it is harmful for the saw, and you stand a good chance of being struck by flying debris.

To cut the trunk, use the bucking and two-cut sequence shown. The first cut should be no deeper than one-third the trunk diameter.

Uphill position

Finish cut

First cut

Support

When the bar nose hits another tree, etc.

X7503320105

25

© 09/2013 ECHO Inc.

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Burn Hazard Chain SAWTable of Contents CS-355T Packing ListRules For Safe Operation SafetyChain Brake Operation Correct Use Of Chain BrakeAutomatic Chain Brake Other Safety PrecautionsCS-355T Personal Condition and Safety Equipment Repetitive Stress Injuries Vibration and ColdSafety Hot Surface Symbols and SignsEmission Control Exhaust / Evaporative Manual Safety Symbols and Important InformationEPA 2010 and Later and/or C.A.R.B. Tier Product Emission Durability Emission Compliance PeriodDescription Description Preparation For Use Guide Bar And Saw Chain-Install/removeTip Guard To Bar Instructions Adjusting Chain Tension Fuel OperationFuel Requirements After use Handling FuelChain Lubricant Starting Cold Engine Running Starting Warm EngineChecking Chain Tension StoppingChain Lubrication Test Cutting InstructionsKickback Limbing Felling the TreeBucking Guide Bar Chain And Guide Bar CombinationSaw Chain Maintenance Intervals MaintenanceSkill Levels Engine Break-In Carburetor AdjustmentSpark Plug Air FilterCheck Fuel System Fuel FilterOil Filter Automatic OilerSprocket Spark Arrestor Muffler Cooling System CleaningLevel Exhaust Port CleaningSetting Saw Chain Setting The Saw ChainMaintenance Engine Problem Troubleshooting Chart TroubleshootingStorage After Use StorageNGK BPM8Y Technical DataOWNER’S Responsibility Warranty StatementsWarranty Statements CS-355T CS-355T CS-355T Warranty Registration Additional or Replacement Manuals ServiceServicing Information Parts/Serial NumberECHO, Incorporated

CS-355T specifications

The Echo CS-355T is a powerful and versatile chainsaw designed for both professional loggers and homeowners seeking efficient tree maintenance solutions. Known for its performance and user-friendly design, this chainsaw combines advanced technologies with craftsmanship to deliver a tool that meets various cutting needs.

One of the standout features of the Echo CS-355T is its robust engine. Powered by a 35.8cc professional-grade two-stroke engine, it balances power and weight effectively. This engine provides ample torque for cutting through tough timber while maintaining impressive fuel efficiency. The chainsaw runs on a mixture of gasoline and oil, giving users the power they need without adding excessive weight.

The CS-355T is equipped with a 14-inch guide bar, ideal for pruning, limbing, and felling small to medium-sized trees. The guide bar, combined with a low-kickback chain, enhances safety and control during use. This makes the CS-355T a reliable choice for both novices and experienced users who need a manageable yet capable saw.

User comfort and convenience are paramount in the design of the Echo CS-355T. The chainsaw features an ergonomic handle, which reduces vibration and provides a firm grip, allowing for extended use without fatigue. Additionally, the tool-less air filter and spark plug cover allow for easy maintenance and quick access to essential components, ensuring minimal downtime.

One of the innovative technologies incorporated in the Echo CS-355T is the proprietary i-30 starting system. This technology allows for easier and quicker starting, which is especially beneficial during cold weather conditions. The chainsaw also boasts a unique automatic oiler system that ensures optimal lubrication of the chain and bar, extending the life of these critical components.

In terms of build quality, the Echo CS-355T showcases a durable construction with high-quality materials, offering reliability even under rigorous use. It's designed for ease of handling and incorporates a chain brake for added safety, providing peace of mind while operating the saw.

In summary, the Echo CS-355T is an impressive chainsaw that stands out for its combination of power, lightweight design, and user-friendly features. Whether you are a professional in the forestry industry or a homeowner tackling yard work, the CS-355T offers the performance and reliability needed for various cutting tasks. With its advanced technology and ergonomic design, it is a valuable addition to any outdoor tool collection.
Top Page Image Contents