Echo Complete Guide to Maintaining Your CS-355T Chainsaw

Page 32

MAINTENANCE

CS-355T

 

 

Exhaust Port Cleaning

Level 2.

Parts Required: As needed: Muffler gasket

1.Remove spark plug cover and remove spark plug.

2.Release chain brake, remove guide bar nuts, sprocket guard, guide bar, and chain.

3.Remove muffler cover.

4.Place piston at top dead center.

5.Remove muffler. Check parts for wear or damage, and replace if necessary.

6.Use a wood or plastic scraping tool to clean deposits from cylinder exhaust port.

Never use a metal tool to scrape carbon from the exhaust port. Do not scratch the cylinder or piston when cleaning the exhaust port. Do not allow carbon particles to enter the cylinder.

7.Install muffler. Tighten bolts to 7-10 N•m (60-90 in•lbf), but do not exceed specifications, otherwise damage to bolts may occur.

8.Connect spark plug lead and replace spark plug cover.

9.Start engine, and allow unit to warm up at idle for several minutes.

10.Stop engine, and re-tighten muffler bolts to 7-10 N•m (60-90 in•lbf).

11.Install muffler cover.

12.Install guide bar and chain. Adjust chain tension.

13.Start engine and check for exhaust leaks between muffler and cylinder head. Stop engine if leak is found and correct problem before operating chain saw.

32

X7503320105

© 09/2013 ECHO Inc.

Image 32
Contents Chain SAW Burn HazardTable of Contents Packing List CS-355TSafety Rules For Safe OperationCorrect Use Of Chain Brake Chain Brake OperationOther Safety Precautions Automatic Chain BrakeCS-355T Personal Condition and Safety Equipment Vibration and Cold Repetitive Stress InjuriesSafety Symbols and Signs Hot SurfaceManual Safety Symbols and Important Information Emission Control Exhaust / EvaporativeEPA 2010 and Later and/or C.A.R.B. Tier Product Emission Durability Emission Compliance PeriodDescription Description Tip Guard To Bar Instructions Guide Bar And Saw Chain-Install/removePreparation For Use Adjusting Chain Tension Fuel Requirements OperationFuel Handling Fuel After useChain Lubricant Starting Cold Engine Starting Warm Engine RunningStopping Checking Chain TensionChain Lubrication Test Cutting InstructionsKickback Felling the Tree LimbingBucking Saw Chain Chain And Guide Bar CombinationGuide Bar Skill Levels MaintenanceMaintenance Intervals Carburetor Adjustment Engine Break-InAir Filter Spark PlugCheck Fuel System Fuel FilterSprocket Automatic OilerOil Filter Cooling System Cleaning Spark Arrestor MufflerExhaust Port Cleaning LevelSetting The Saw Chain Setting Saw ChainMaintenance Troubleshooting Engine Problem Troubleshooting ChartStorage Storage After UseTechnical Data NGK BPM8YWarranty Statements OWNER’S ResponsibilityWarranty Statements CS-355T CS-355T CS-355T Service Warranty Registration Additional or Replacement ManualsServicing Information Parts/Serial NumberECHO, Incorporated

CS-355T specifications

The Echo CS-355T is a powerful and versatile chainsaw designed for both professional loggers and homeowners seeking efficient tree maintenance solutions. Known for its performance and user-friendly design, this chainsaw combines advanced technologies with craftsmanship to deliver a tool that meets various cutting needs.

One of the standout features of the Echo CS-355T is its robust engine. Powered by a 35.8cc professional-grade two-stroke engine, it balances power and weight effectively. This engine provides ample torque for cutting through tough timber while maintaining impressive fuel efficiency. The chainsaw runs on a mixture of gasoline and oil, giving users the power they need without adding excessive weight.

The CS-355T is equipped with a 14-inch guide bar, ideal for pruning, limbing, and felling small to medium-sized trees. The guide bar, combined with a low-kickback chain, enhances safety and control during use. This makes the CS-355T a reliable choice for both novices and experienced users who need a manageable yet capable saw.

User comfort and convenience are paramount in the design of the Echo CS-355T. The chainsaw features an ergonomic handle, which reduces vibration and provides a firm grip, allowing for extended use without fatigue. Additionally, the tool-less air filter and spark plug cover allow for easy maintenance and quick access to essential components, ensuring minimal downtime.

One of the innovative technologies incorporated in the Echo CS-355T is the proprietary i-30 starting system. This technology allows for easier and quicker starting, which is especially beneficial during cold weather conditions. The chainsaw also boasts a unique automatic oiler system that ensures optimal lubrication of the chain and bar, extending the life of these critical components.

In terms of build quality, the Echo CS-355T showcases a durable construction with high-quality materials, offering reliability even under rigorous use. It's designed for ease of handling and incorporates a chain brake for added safety, providing peace of mind while operating the saw.

In summary, the Echo CS-355T is an impressive chainsaw that stands out for its combination of power, lightweight design, and user-friendly features. Whether you are a professional in the forestry industry or a homeowner tackling yard work, the CS-355T offers the performance and reliability needed for various cutting tasks. With its advanced technology and ergonomic design, it is a valuable addition to any outdoor tool collection.