Echo 2CS-450 instruction manual Correct USE of Chain Brake, Spark Arrestor Muffler

Page 10

SPARK ARRESTOR MUFFLER

The spark arrestor muffler controls the exhaust noise and prevents hot, glowing particles of carbon from leaving the muffler.

Make sure the spark arrestor screen is in good repair and properly seated in the muffler.

Certain internal combustion engines operated on forest, brush, and/or grass-covered areas in the states of Washington, Oregon, Idaho, California,

Minnesota, New Jersey and Maine, are required to be equipped with a spark arrestor.

This requirement also applies to all U.S. Forest Service lands.

In some of these areas, the spark arrestor system must be certified per USDA Forest Service Regula- tion SAE J335.

Check with your local or state authorities for spe- cific regulations in your area.

Failure to follow these requirements is a violation of the law.

CORRECT USE OF CHAIN BRAKE

Rotational kickback

Reduced radius belongs on top

Rotational kickback

Chain moving downward at impact

Liner kickback

Pinch

DANGER

Kickback safety precaution for chain saw users: Kickback may occur when the nose or tip of the guide bar touches an object or when the wood closes in and pinches the saw chain in the cut.

The installation of a chain brake may be mandatory by law or as stipulated by insurance regulations in your area of operation.

You should inquire through local government of- fices, your employer or your local dealer to ensure that your chain saw conforms to the required safety standard.

ECHO chain brakes have been designed and tested to comply with international safety standards as follows.

USA

: ANSI Standard B175.1 - 2000

 

Safety Requirement for chain saws

Canada : CSA Standard Z 62.1 CHAIN SAWS

WARNING

ANSI Standard B175. 1 - 2000 stipulates that the brake shall stop the chain 0.12 seconds at an engine speed of 13500 r/min.

It is the responsibility of the owner/operator to ensure that the brake is serviced, adjusted and tested strictly in accordance with the instructions as detailed herein in order

to ensure that the brake performance is maintaind in compliance with the Standard B175. 1 - 2000.

CS-450

10

Image 10
Contents Chain Saw Kickback Safety Precautions for Chain Saw Users Rules for Safe OperationOther Safety Precautions Contents Symbols and SignsSymbol Form DecalsEPA Phase 2 / C.A.R.B. Tier Packing ListNomenclature of Parts Operator Safety Front handle for the left hand Support hanEYE and Hearing Protection Vibration and ColdRepetitive Stress Injury Wear Proper ClothingCorrect USE of Chain Brake Spark Arrestor MufflerKick Guard to BAR INSTRUC- Tions Preparation for USEGuide BAR and SAW Chain IN- STALLATION/REMOVAL Adjusting Chain Tension Handling Fuel Chain Lubricant Mixing InstructionsOperation When the Engine is Cold When the Engine is WarmChecking Chain Tension RunningStopping Chain Lubrication TestCutting Instruction GeneralFelling the Tree Limbing Testing the Brake Chain Brake OperationAutomatic Chain Brake Winter OperationChain and Guide BAR Combination CS-450Maintenance and Care Maintenance IntervalsCarburetor Adjustment Engine Break-InSpark Plug AIR FilterCheck Fuel System Fuel FilterCylinder Fins Guide BARSprocket Muffler Spark ArrestorExhaust Port Cleaning Setting the SAW Chain Setting SAW Chain64 mm 0.025 Troubleshooting Engine Problem Troubleshooting ChartTechnical Data Storage After USEExceptions 99922201032 12/03/09 99922201033 ECHO, Incorporated
Related manuals
Manual 48 pages 18.38 Kb

2CS-450, CS-450 specifications

The Echo CS-450 is a powerful and versatile chainsaw designed for both professional and home use. Renowned for its reliability and performance, the CS-450 is an ideal choice for tree care, land management, and firewood cutting. With its robust design, it stands out as a dependable tool for various cutting tasks.

One of the standout features of the Echo CS-450 is its engine. It is powered by a 45.0 cc, 2-stroke engine that delivers exceptional power while maintaining fuel efficiency. This engine translates to a power output of approximately 2.7 kW, allowing users to tackle demanding cutting jobs with ease. The chainsaw also incorporates a patented i-30 starting system, which reduces the effort required to start the engine. This feature significantly enhances user experience, especially during cold starts or extended use.

The CS-450 is equipped with a 20-inch guide bar, making it suitable for medium to large cutting tasks. The bar length provides a good balance between maneuverability and cutting capacity. Additionally, the chainsaw operates with a low-kickback chain, improving user safety while offering smooth and efficient cutting performance. This is especially important for both novice and experienced users, as it minimizes the risk of accidents.

In terms of design and ergonomics, the Echo CS-450 is built for comfort and ease of use. The chainsaw features an anti-vibration system that reduces operator fatigue during prolonged use. Its lightweight construction, weighing around 10.1 lbs, makes it easy to handle without sacrificing power. The front and rear hand grips are designed for enhanced comfort, allowing users to maintain good control over the saw.

The CS-450 is also equipped with a tool-less air filter cover and a side-access chain tensioner, making maintenance straightforward and efficient. The cleaner air filter helps extend engine life, while the quick chain tensioning system allows users to make adjustments effortlessly on the job.

For those who value durability, the Echo CS-450 features a heavy-duty build that includes a magnesium crankcase, resisting wear and tear under demanding conditions. The chainsaw is designed to operate in various environments, whether it be professional settings or home gardening tasks.

In summary, the Echo CS-450 combines power, efficiency, and comfort in a robust design. With its advanced features, including a high-performance engine, safety mechanisms, and user-friendly design elements, it remains a top choice for individuals seeking a reliable and effective chainsaw. Whether you are cutting firewood or maintaining trees, the CS-450 is an excellent partner to get the job done efficiently and safely.