Echo 2CS-450 AIR Filter, Check Fuel System, Spark Plug, Fuel Filter, OIL Filter

Page 26

Cleaner cover knob

Air cleaner cover

Spark plug

Air filter cover Air filter

Cylinder cover

0.65 mm (0.026 in.)

Oil filter

 

Fuel filter

Oil tank cap

Fuel tank cap

AIR FILTER

•Check before every use.

•Loosen cleaner cover knob and remove air cleaner cover and filter.

•Brush off dust lightly, or clean with compressed air, or replace the air filter.

•Reinstall air filter and cover.

CHECK FUEL SYSTEM

•Check before every use.

•After refueling, make sure fuel does not leak from around fuel pipe, fuel grommet or fuel tank cap.

•In case of fuel leakage there is a danger of fire.

Stop using the machine immediately and re- quest your dealer to inspect or replace.

SPARK PLUG

•Check periodically.

•The standard spark gap is 0.65 mm

(0.026 in.).

•Correct the spark gap if it is wider or narrower than the standard gap.

•Fastening torque: 15 to 17 N·m

(130 to 145 in. lb.).

FUEL FILTER

•Check periodically.

•Do not allow dust to enter fuel tank.

•A clogged filter will cause difficulty in starting engine or abnormalities in engine performance.

•Pull the fuel filter out through fuel inlet port with a piece of steel wire or the like.

•When the filter is dirty, replace it.

•When the inside of the fuel tank is dirty, rinsing the tank out with gasoline can clean it.

OIL FILTER

•Check periodically.

•Do not allow dust to enter into oil tank.

•A clogged oil filter will affect the normal lubricat- ing system.

•Pull it out through oil filling hole with a piece of steel wire or the like.

•If the filter is dirty, wash it in gasoline or replace it.

•When the inside of the tank gets dirty, rinsing the tank out with gasoline can clean it.

CS-450

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Chain Saw Kickback Safety Precautions for Chain Saw Users Rules for Safe OperationOther Safety Precautions Contents Symbols and SignsSymbol Form DecalsEPA Phase 2 / C.A.R.B. Tier Packing ListNomenclature of Parts Operator Safety Front handle for the left hand Support hanEYE and Hearing Protection Vibration and ColdRepetitive Stress Injury Wear Proper ClothingCorrect USE of Chain Brake Spark Arrestor MufflerGuide BAR and SAW Chain IN- STALLATION/REMOVAL Preparation for USEKick Guard to BAR INSTRUC- Tions Adjusting Chain Tension Handling Fuel Chain Lubricant Mixing InstructionsOperation When the Engine is Cold When the Engine is WarmChecking Chain Tension RunningStopping Chain Lubrication TestCutting Instruction GeneralFelling the Tree Limbing Testing the Brake Chain Brake OperationAutomatic Chain Brake Winter OperationChain and Guide BAR Combination CS-450Maintenance and Care Maintenance IntervalsCarburetor Adjustment Engine Break-InSpark Plug AIR FilterCheck Fuel System Fuel FilterCylinder Fins Guide BARSprocket Muffler Spark ArrestorExhaust Port Cleaning Setting the SAW Chain Setting SAW Chain64 mm 0.025 Troubleshooting Engine Problem Troubleshooting ChartTechnical Data Storage After USEExceptions 99922201032 12/03/09 99922201033 ECHO, Incorporated
Related manuals
Manual 48 pages 18.38 Kb

2CS-450, CS-450 specifications

The Echo CS-450 is a powerful and versatile chainsaw designed for both professional and home use. Renowned for its reliability and performance, the CS-450 is an ideal choice for tree care, land management, and firewood cutting. With its robust design, it stands out as a dependable tool for various cutting tasks.

One of the standout features of the Echo CS-450 is its engine. It is powered by a 45.0 cc, 2-stroke engine that delivers exceptional power while maintaining fuel efficiency. This engine translates to a power output of approximately 2.7 kW, allowing users to tackle demanding cutting jobs with ease. The chainsaw also incorporates a patented i-30 starting system, which reduces the effort required to start the engine. This feature significantly enhances user experience, especially during cold starts or extended use.

The CS-450 is equipped with a 20-inch guide bar, making it suitable for medium to large cutting tasks. The bar length provides a good balance between maneuverability and cutting capacity. Additionally, the chainsaw operates with a low-kickback chain, improving user safety while offering smooth and efficient cutting performance. This is especially important for both novice and experienced users, as it minimizes the risk of accidents.

In terms of design and ergonomics, the Echo CS-450 is built for comfort and ease of use. The chainsaw features an anti-vibration system that reduces operator fatigue during prolonged use. Its lightweight construction, weighing around 10.1 lbs, makes it easy to handle without sacrificing power. The front and rear hand grips are designed for enhanced comfort, allowing users to maintain good control over the saw.

The CS-450 is also equipped with a tool-less air filter cover and a side-access chain tensioner, making maintenance straightforward and efficient. The cleaner air filter helps extend engine life, while the quick chain tensioning system allows users to make adjustments effortlessly on the job.

For those who value durability, the Echo CS-450 features a heavy-duty build that includes a magnesium crankcase, resisting wear and tear under demanding conditions. The chainsaw is designed to operate in various environments, whether it be professional settings or home gardening tasks.

In summary, the Echo CS-450 combines power, efficiency, and comfort in a robust design. With its advanced features, including a high-performance engine, safety mechanisms, and user-friendly design elements, it remains a top choice for individuals seeking a reliable and effective chainsaw. Whether you are cutting firewood or maintaining trees, the CS-450 is an excellent partner to get the job done efficiently and safely.
Top Page Image Contents