Echo 2CS-450 instruction manual Chain Brake Operation, Testing the Brake

Page 21

Kickback motion

Kickback

Chain brake function

When the lever is pushed forward, chain brake instantly stops the chain.

Chain brake unlock

When the lever is fully pulled, toward the operator, brake is unlocked.

CHAIN BRAKE OPERATION

Set the lever in the unlocked position before starting to cut.

If the brake is tripped by kickback reaction, the chain will stop immediately. Release the throt- tle to avoid possible damage to the engine or clutch.

Do not attempt to operate the engine with the brake locked.

TESTING THE BRAKE

Start the engine on a solid level surface and run at a fast idle until warm.

Hold the saw firmly by the handles and acceler- ate the engine to a fast idle.

Slowly operate the chain brake lever while hold- ing the saw firmly on the ground.

When the brake lever trips, the chain should stop.

Immediately release the throttle trigger.

WARNING

If the chain does not stop immediately, return the saw to your authorized ECHO dealer for repair.

NOTE

For practice, while cutting a small tree, push the lever forward to lock the brake.

Confirm that the brake works properly before each use.

If the chain brake is clogged with wood chips, function of the brake may deteriorate. Always keep the device clean.

Do not increase engine revolution while the chain brake is locked.

Use the chain brake only in starting or in emer- gencies.

When using throttle latch at starting, keep the chain brake locked.

IMPORTANT

Do not allow the saw to tip forward in order to avoid damage to the chain.

21

CS-450

 

Image 21
Contents Chain Saw Rules for Safe Operation Kickback Safety Precautions for Chain Saw UsersOther Safety Precautions Symbols and Signs ContentsDecals Symbol FormPacking List EPA Phase 2 / C.A.R.B. TierNomenclature of Parts Front handle for the left hand Support han Operator SafetyRepetitive Stress Injury Vibration and ColdEYE and Hearing Protection Wear Proper ClothingSpark Arrestor Muffler Correct USE of Chain BrakePreparation for USE Kick Guard to BAR INSTRUC- TionsGuide BAR and SAW Chain IN- STALLATION/REMOVAL Adjusting Chain Tension Handling Fuel Mixing Instructions Chain LubricantOperation When the Engine is Warm When the Engine is ColdStopping RunningChecking Chain Tension Chain Lubrication TestGeneral Cutting InstructionFelling the Tree Limbing Chain Brake Operation Testing the BrakeWinter Operation Automatic Chain BrakeCS-450 Chain and Guide BAR CombinationMaintenance Intervals Maintenance and CareEngine Break-In Carburetor AdjustmentCheck Fuel System AIR FilterSpark Plug Fuel FilterSprocket Guide BARCylinder Fins Muffler Spark ArrestorExhaust Port Cleaning Setting SAW Chain Setting the SAW Chain64 mm 0.025 Engine Problem Troubleshooting Chart TroubleshootingStorage After USE Technical DataExceptions 99922201032 12/03/09 99922201033 ECHO, Incorporated
Related manuals
Manual 48 pages 18.38 Kb

2CS-450, CS-450 specifications

The Echo CS-450 is a powerful and versatile chainsaw designed for both professional and home use. Renowned for its reliability and performance, the CS-450 is an ideal choice for tree care, land management, and firewood cutting. With its robust design, it stands out as a dependable tool for various cutting tasks.

One of the standout features of the Echo CS-450 is its engine. It is powered by a 45.0 cc, 2-stroke engine that delivers exceptional power while maintaining fuel efficiency. This engine translates to a power output of approximately 2.7 kW, allowing users to tackle demanding cutting jobs with ease. The chainsaw also incorporates a patented i-30 starting system, which reduces the effort required to start the engine. This feature significantly enhances user experience, especially during cold starts or extended use.

The CS-450 is equipped with a 20-inch guide bar, making it suitable for medium to large cutting tasks. The bar length provides a good balance between maneuverability and cutting capacity. Additionally, the chainsaw operates with a low-kickback chain, improving user safety while offering smooth and efficient cutting performance. This is especially important for both novice and experienced users, as it minimizes the risk of accidents.

In terms of design and ergonomics, the Echo CS-450 is built for comfort and ease of use. The chainsaw features an anti-vibration system that reduces operator fatigue during prolonged use. Its lightweight construction, weighing around 10.1 lbs, makes it easy to handle without sacrificing power. The front and rear hand grips are designed for enhanced comfort, allowing users to maintain good control over the saw.

The CS-450 is also equipped with a tool-less air filter cover and a side-access chain tensioner, making maintenance straightforward and efficient. The cleaner air filter helps extend engine life, while the quick chain tensioning system allows users to make adjustments effortlessly on the job.

For those who value durability, the Echo CS-450 features a heavy-duty build that includes a magnesium crankcase, resisting wear and tear under demanding conditions. The chainsaw is designed to operate in various environments, whether it be professional settings or home gardening tasks.

In summary, the Echo CS-450 combines power, efficiency, and comfort in a robust design. With its advanced features, including a high-performance engine, safety mechanisms, and user-friendly design elements, it remains a top choice for individuals seeking a reliable and effective chainsaw. Whether you are cutting firewood or maintaining trees, the CS-450 is an excellent partner to get the job done efficiently and safely.