| OPERATION |
|
|
Proper lubrication of the chain while in operation reduces friction between the chain and the guide bar to a minimum and assures a longer service life.
•Use bar and chain oil of high quality for this purpose.
•Do not use used or reclaimed oil to avoid various oiler problems.
•Use ECHO bar and chain oil.
•When ECHO bar and chain oil is not available: Use motor oil, etc.
•Use bar and chain oil of the following grades:
•SAE No. 30....in summer
•SAE No. 10....in winter or when cutting resinous trees.
•When refueling, also refill chain oil.
Oil tank cap | Fuel tank cap |
|
|
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit.
Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a poison gas. Breathing CO can cause unconsciousness, serious injury, or death. Exhaust can cause serious burns. ALWAYS position unit so that exhaust is directed away from your face and body.
Operation of this equipment may create sparks that can start fires. This unit is equipped with a spark arrestor to prevent discharge of hot particles from the engine. Metal cutters can also create sparks if the cutter strikes rocks, metal, or other hard objects. Contact local fire authorities for laws or regulations regarding fire prevention requirements.
Starting Cold Engine
Make sure the bar and chain are free from any obstruction when starting the chain saw.
1.Move chain brake lever fully forward to lock chain brake before starting.
2.Fill the fuel tank with fuel mixture. Do not over fill.
3.Fill the chain oil tank with lubricant. Do not over fill.
4.Lay unit on a flat, clear area and keep bar and chain clear of all obstacles.
For more information scan this QR code.
A
X7503207802 | 19 |
© 08/2013 ECHO Inc.