Echo CS-303T instruction manual Operation, Fuel Requirements, Handling Fuel

Page 17

CS-303T

OPERATION

 

 

Note: All chains require frequent adjustments.

OPERATION

Fuel

Alternative fuels, such as E-15 (15% ethanol), E-85 (85% ethanol) or any fuels not meeting ECHO requirements are NOT approved for use in ECHO 2-stroke gasoline engines. Use of alternative fuels may cause performance problems, loss of power, overheating, fuel vapor lock, and unintended machine operation, including, but not limited to, improper clutch engagement. Alternative fuels may also cause premature deterioration of fuel lines, gaskets, carburetors and other engine components.

Fuel Requirements

Gasoline - Use 89 Octane [R+M/2] (mid grade or higher) gasoline known to be good quality. Gasoline may contain up to 10% Ethanol (grain alcohol) or 15% MTBE (methyl tertiary-butyl ether). Gasoline containing methanol (wood alcohol) is NOT approved. ECHO brand Power Fuelis 93 octane, ethanol-free fuel premixed with ECHO Red Armor® engine oil at 50:1 ratio. Use of ECHO Power Fuelis recommended to extend engine life in all air-cooled 2-stroke and 2/4-stroke hybrid engines.

Two Stroke Oil - A two-stroke engine oil meeting ISO-L-EGD (ISO/CD 13738) and J.A.S.O. FD Standards must be used. Echo brand premium Power Blend XUniversal 2-Stroke Oil meets these standards. Engine problems due to inadequate lubrication caused by failure to use an ISO-L-EGD (ISO/CD 13738) and J.A.S.O. FD certified oil, such as Echo premium Power Blend X, will void the two-stroke engine warranty.

Echo premium Power Blend XUniversal 2-Stroke Oil may be mixed at 50:1 ratio for application in all Echo engines sold in the past regardless of ratio specified in those manuals.

Handling Fuel

Fuel is VERY flammable. Use extreme care when mixing, storing or handling, or serious personal injury may result.

Use an approved fuel container.

DO NOT smoke near fuel.

DO NOT allow flames or sparks near fuel.

Fuel tanks/cans may be under pressure. Always loosen fuel caps slowly allowing pressure to equalize.

NEVER refuel a unit when the engine is HOT or RUNNING!

X7503207802

17

© 08/2013 ECHO Inc.

Image 17
Contents Burn Hazard Chain SAWTable of Contents CS-303T Packing ListRules For Safe Operation SafetyChain Brake Operation Correct Use Of Chain BrakeAutomatic Chain Brake Other Safety PrecautionsCS-303T Personal Condition and Safety Equipment Repetitive Stress Injuries Vibration and ColdSafety Hot Surface Symbols and SignsEmission Control Exhaust / Evaporative Manual Safety Symbols and Important InformationEPA 2010 and Later and/or C.A.R.B. Tier Product Emission Durability Emission Compliance PeriodDescription Description Tip Guard to Bar Instructions Guide Bar and Saw Chain Installation/RemovalPreparation For Use Adjusting Chain Tension Fuel OperationFuel Requirements Handling FuelAfter use Chain LubricantStarting Cold Engine Starting Hard to Start Engine Running Starting Warm EngineChecking Chain Tension StoppingChain Lubrication Test Cutting InstructionsKickback Limbing Felling the TreeBucking Saw Chain Chain And Guide Bar CombinationGuide Bar Skill Levels MaintenanceMaintenance Intervals Engine Break-In Carburetor AdjustmentSpark Plug Air FilterCheck Fuel System Fuel FilterOil Filter Automatic OilerSpark Arrestor Muffler Cooling System CleaningSprocket Spark Arrestor Screen Exhaust Port CleaningSetting Saw Chain Setting The Saw ChainMaintenance Engine Problem Troubleshooting Chart TroubleshootingStorage After Use StorageNGK BPM8Y Technical DataExceptions Warranty StatementsWarranty Statements CS-303T CS-303T CS-303T Warranty Registration Additional or Replacement Manuals ServiceServicing Information Parts/Serial NumberECHO, Incorporated