NOMENCLATURE OF PARTS
1.Instruction manual - Included with unit. Read before operation and keep for future reference to learn proper, safe operating techniques.
2.Safety manual - Describe operating and safety instructions for this chain saw.
3.Front hand guard - Guard between the front handle and the saw chain for protecting the hand from injuries and aiding in control of the chain saw if the hand slips off the handle. This guard is used to lock the chain brake which is to stop the saw chain rotation.
4.Rear handle (for the right hand) - Support handle located on the top of the engine housing.
5.Choke control knob - Device for enriching the fuel/air mixture in the carburetor to aid cold starting.
6.Muffler cover - Cover the muffler not to make operator touch to hot surface of muffler.
7.Clutch cover - Protective cover to the guide bar, saw chain, clutch and sprocket when the chain saw is in use.
8.Chain tension adjuster - Device to adjust chain tension.
9.Chain catcher - A projection designed to reduce the risk of the operator’s right hand from being hit by a chain which has broken or derailed from the guide bar during cutting.
10. Guide bar - The part that supports and guides the saw chain.
11. Saw chain - Chain, serving as a cutting tool.
12. Bar tip guard -
13. Fuel tank cap - For closing the fuel tank.
14. Oil tank cap - For closing the oil tank.
15. Starter handle - Pull handle slowly until starter engages then quickly and firmly.
When engine starts, return handle slowly. Do not let handle snap back or damage to unit will occur.
16.Air cleaner cover - Covers air cleaner.
17. Cleaner cover knob - Device for installing the air cleaner cover.
18. Purge pump - When starting engine, push purge pump 3 or 4 times.
19. Throttle trigger - Device activated by the operator’s finger, for controlling the engine speed.
20. Throttle trigger lockout - A safety lever which must be depressed before the throttle trigger can be activated in order to prevent the accidental operation of the throttle trigger.
21.Ignition switch - Device for connecting and disconnecting the ignition system and thus allowing the engine to be started or stopped.
22. Front handle (for the left hand) - Support handle located at the left side of the engine housing.
23. Lifting hook - If working off the ground the operator must be trained in safe climbing techniques and use of all recommended safety equipment.
7 |