Marantz CDR632 manual CD-R/CD-RW disc operations, Finalizing, Un-finalizing

Page 31

6 – CD-R/CD-RW disc operations

Caution

Be careful that the power is not accidentally turned off while the finalize, un-finalize, refresh, or disc/track erase operations are being executed. If this occurs, the data on the disc will be corrupted, and it is also possible that the disc itself will become unusable.

This section explains various operations that you can perform on a CD-R/CD-RW disc, such as finalizing a recorded CD-R/CD-RW disc so that it can be played on a conventional CD player, or erasing all or part of the tracks on a CD-RW disc.

4To execute the operation, press the ENTER button once again.

Finalization will begin, and the display will indi- cate the estimated time remaining until comple- tion as “TOC X:XX”.

When finalization is finished, the display will indicate “Complete”. All operating buttons are disabled while finalization is being performed.

ENGLISH

Finalizing

Finalizing is the operation of writing the TOC (Table Of Contents: information about the recorded data, such as the number of songs and the playback start time of each song) to the CD-R/CD-RW media.

A disc recorded on the CDR632 cannot be played back on a conventional CD player until the final TOC has been written to the disc. (The CDR632 itself will be able to play the disc even before it has been final- ized.)

Normally, no additional recording can be done on CD-R/CD-RW media once it has been finalized. However in the case of a CD-RW, you can “un- finalize” the disc so that additional recording can be performed.

1

 

 

3, 4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

1Insert a recorded CD-R/CD-RW disc into the disc tray.

2While stopped, press the FINALIZE/INS but- ton on the front panel or the FINALIZE but- ton on the remote control unit.

The display will indicate “FINALIZE?”.

If you decide to cancel the operation, press the FINALIZE/INS button (or the FINALIZE button on the remote control unit) once again.

3Press the ENTER button.

Un-finalizing

Un-finalizing is an operation that allows further recording on a CD-RW disc that has been finalized.

1

 

 

3, 4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

1Insert a finalized CD-RW disc into the disc tray.

2While stopped, press the ERASE/DEL button on the front panel (or the ERASE button on the remote control unit), and use the MULTI JOG dial (or the SKIP buttons on the remote control unit) to select “UNFINALIZE?”.

If you decide to cancel the operation, press the ERASE/DEL button (or the remote control unit SKIP buttons) once again.

3Press the ENTER button.

The display will indicate “Sure?”.

If you decide to cancel the operation, press the STOP button.

4To execute the operation, press the ENTER button once again.

Un-finalization will begin, and the display will indicate the estimated time remaining until com- pletion as “Erase X:XX”.

When un-finalization is finished, the display will indicate “Complete”.

The display will indicate “Sure?”.

If you decide to cancel the operation, press the STOP button.

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Model CDR632 User Guide Copyright Do not OpenImportant Safety Instructions Important Safety InstructionsAdditional Safety Information Rack-mounting the Unit Conventions in this manual ContentsIntroduction What this product consistsAbout discs Always keep the disc surface cleanIntroduction-About discs Installing the batteries What is finalizing?Using the remote control unit Introduction-What is finalizing?Front panel Front and rear panelFront and rear panel-Rear panel Rear panelFront and rear panel-RC632CDR remote control unit RC632CDR remote control unitOutput Audio signal connectionsFront and rear panel-Audio signal connections InputPress the Menu button to enter Menu mode Menu mode operationsBasic operation in Menu mode If using the front panelMenu mode operations-Basic operation in Menu mode If using the remote control unitTypes of disc that can be played PlaybackBasic playback operation Playback-Selecting a song Selecting a songSkipping Specifying a track numberTo stop searching, release the Search but- ton Track searchDirect search Playback-Track searchIf you specify a track number and minutes position Using the remote control unit buttonsPlayback modes If you specify only the track numberProgram playback Using menu modeContinue playback Single playbackShuffle playback Switching the time displayTimer playback Playback-Switching the time displayPlayback-Repeat playback Repeat playbackNormal repeat playback Repeat playbackPlayback-Pitch control playback Pitch control playbackPlaying MP3 files Playing back all MP3 filesMP3 will playback Specifying a directory for playbackPlayback-Playing MP3 files To begin playback, press the play but- tonTurn the Multi JOG dial to turn directory mode on/off Directory playback settingsDisplay will indicate DIR XXX you can select on or OFF Recording Selecting the input signalUsing the sample rate converter Adjusting the input signalBasic recording operations Monitoring the input signalTo defeat monitoring of the input signal This section explains how to insert a disc and recordRecording-Switching the time display Display will indicate Slev XXXdB If necessary, you can adjust the sync level as followsFade-in/out Sync recording Recording-Fade-in/outBegin playback on input source unit Recording-Sync recordingRecording-Auto track recording Auto track recordingRecording-Manually updating the track number Track number will be updatedManually updating the track number Rec muteFinalizing CD-R/CD-RW disc operationsUn-finalizing Insert the disc into the disc tray RefreshingErasing a disc CD-R/CD-RW disc operations-RefreshingCD-R/CD-RW disc operations-Erasing a track Erasing a trackNaming a disc Entering namesEntering names-Naming a track Naming a trackMessages Error messagesMessages during operation Troubleshooting Dimensions SpecificationsService Information Americas only Limited WarrantyHoldings Inc

CDR632 specifications

The Marantz CDR632 is a noteworthy addition to the realm of audio technology, specifically designed for music enthusiasts who value high-quality sound reproduction and user-friendly features. As a versatile component, this CD recorder combines the functionality of both a CD player and a digital recorder, allowing users to capture their favorite music directly onto CDs with exceptional ease.

One of the standout features of the CDR632 is its dual recording capability. It supports both CD-R and CD-RW formats, providing flexibility for music lovers who wish to create their own music compilations or archive their favorite tracks. The device features a straightforward front panel with intuitive controls, making it accessible for users of all experience levels. The clear LCD display provides information on track number, time remaining, and recording status, ensuring that users have a comprehensive overview of their recordings.

In terms of audio quality, the Marantz CDR632 employs advanced technologies that enhance sound fidelity. The unit boasts a high-quality 24-bit/192kHz Analog-to-Digital Converter (ADC), ensuring pristine sound capture from a variety of analog sources, including vinyl records and cassettes. Furthermore, the recorder's Direct Record feature allows for immediate recording from any analogue source, ensuring minimal fuss and maximum convenience.

Another impressive aspect of the CDR632 is its ability to include new features such as automatic track increment, which segments recordings into individual tracks based on silence detection. This is particularly useful for users looking to compile lengthy recordings into manageable segments. The unit also incorporates a digital input, allowing easy connections to external digital sources like CD players or computers, expanding its range of usability.

Moreover, the CDR632 is equipped with a robust build quality typical of Marantz products. The emphasis on durability often translates into a longer-lasting device, making it a worthy investment for audiophiles. The design also includes a durable transport mechanism, ensuring reliability during both playback and recording processes.

In conclusion, the Marantz CDR632 stands out as a reliable and high-performance CD recorder that blends convenience with superior audio quality. With its array of features and solid construction, it serves as an excellent tool for anyone looking to preserve their music collection and create custom compilations in a user-friendly manner. Whether for personal enjoyment or professional use, the CDR632 remains a standout option in the digital audio recording landscape.
Top Page Image Contents