CHASSIS:
BODY:
SEAT:
MOWER DECK:
BLADE DRIVE:
DRIVE SYSTEM:
ENGINE:
STARTING SYSTEM:
TIRES:
RECOMMENDED TIRE PRESSURE: CAPACITIES:
DIMENSIONS:
NOTE:
SPECIFICATIONS
Model ZTR 5502
1 1 GA - rectangular tube
Two piece - made of rotational molded polyethylene. Front body contains access panels for battery service and engine to mower deck belt removal. Rear body tilts up to allow service on the entire drive system.
Ergonomically designed for operator comfort by use of high density closed cell foam, contoured back rest and arm rests. Seat is adjustable fore and aft.
1 1 GA fabricated welded construction with external reinforcement ribs
3 blades combine for a 50" cut width
Cut height approximately 1 .5" to 4.5" via 8 position lift handle
Electric clutch
Each rear wheel is independently driven by a HydroGear
20 HP Kohler Magnum, Vertical Crankshaft,
Electric by key switch operation with safety interlocks on parking brake and blade drive clutch.
Front | 11 X 4 | X 5 smooth profile |
Rear | 20 X 1 0 X 8 Multi Trac | |
Front | Ibs. | |
Rear | 8- 14 | Ibs. |
Fuel - 4.8 gallons total (dual tanks)
Hydrostat oil tank - 3 quart with
Hydrostat oil recommendation, refer to page 37
Engine - 2 qts. SAE 30 (with filter)
Width | 60" |
Height | 45" |
Length | 72" |
Weight | 680 Ibs. |
Additional information provided in service instructions under the individual component.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Page 9