Dixon 1998, ZTR 4515K manual Engage parking brake before starting engine, Starting Instructions

Page 19

OPERATION INSTRUCTIONS

The Dixon ZTR requires only two drive levers to control braking, turning, speed, and direction.

On initial operation, set throttle speed on slow & operate with mower blade "OFF". To avoid "over-controlling" the mower, use a light touch on the drive levers. Slight movements using fingertip control is all that is necessary.

Engage parking brake before starting engine.

STARTING INSTRUCTIONS:

1.Parking brake must be on, control levers swung out, and blade drive disengaged.

2.Move throttle control to "Choke" position if engine is cold, full throttle if warm.

3.Insert ignition key and turn to "Start" position. When engine starts, release ignition key. Key will return to "Run" position.

4.Move throttle from "Choke" to desired speed position.

5.Release parking brake.

6.Swing levers in.

NOTE: While mowing throttle control should be set to the MAXIMUM or wide open setting to insure adequate cooling of the engine and to maintain mower deck blade speed.

Engine cannot be restarted when blade drive is engaged, the parking brake is off, or levers are swung in.

Safety switches stop engine when operator leaves seat while mower blade is engaged.

Always turn engine off when leaving mower. DO NOT

rely on safety switches.

Page 16

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Page Important Read Carefully Index Page Safety Alert Symbol SafetyGeneral Operation Do not Children Service Dixon Protection Plus TWO Year Limited Warranty Policy Specifications Seat Adjustment Instructions Controls To SET Parking Brake Parking BrakeTransmission Drive System Braking To GO ForwardTo GO Backward TurningCircuit Breaker Blade DriveOperation Instructions Testing of Safety Interlock Systems Starting Instructions Engage parking brake before starting engineMowing with a Mulching Attachment Mowing with a Grass Catcher Attachment Grass Height Suggestions Side Discharge of the ClippingsMaintenance Schedule Care and MaintenanceMower Blade Maintenance Care and MaintenanceBelt Tension Forward Travel Speed Adjustment Neutral Adjustment Mower Deck Leveling Procedure Deck Removal Care and Maintenance Changing the Engine OIL Chassis Locations Service IntervalsRecommended Grease Electrical Systems Kohler Filter Part Numbers Briggs & Stratton Filter Part NumbersSituation Causes Remedy Mower CUT QualityDrive System Situation Causes Remedy Electrical System Date OIL Changed Date Engine Tuned Owner InformationSeries Part No
Top Page Image Contents