Dixon 1998, ZTR 4515K manual Deck Removal

Page 29

CARE AND MAINTENANCE

36" DECK REMOVAL

1.Place cut height lever in lowest cut position.

2.Loosen nut on belt idler shock mount until belt can be removed from electric clutch pulley on the bottom of the engine.

3.Remove hair pin cotter and washer from one end of deck support cross shaft. Note location of remaining shim washers used between chassis and mower deck plates. Slide shaft from chassis and mower deck.

4.Remove hair pin cotter and washer from each deck L-rod. Remove L-rods from lift arms. At this point, deck will drop down.

5.Carefully raise and support front of chassis. Slide mower deck to either side for removal. (Reverse procedure to reinstall deck assembly)

Page 26

Image 29

Contents Page Important Read Carefully Index Page Safety Alert Symbol SafetyGeneral Operation Do not Children Service Dixon Protection Plus TWO Year Limited Warranty Policy Specifications Seat Adjustment Instructions Controls Transmission Drive System Parking BrakeTo SET Parking Brake To GO Backward To GO ForwardTurning BrakingCircuit Breaker Blade DriveOperation Instructions Testing of Safety Interlock Systems Starting Instructions Engage parking brake before starting engineMowing with a Mulching Attachment Mowing with a Grass Catcher Attachment Grass Height Suggestions Side Discharge of the ClippingsMaintenance Schedule Care and MaintenanceMower Blade Maintenance Care and MaintenanceBelt Tension Forward Travel Speed Adjustment Neutral Adjustment Mower Deck Leveling Procedure Deck Removal Care and Maintenance Changing the Engine OIL Recommended Grease Service IntervalsChassis Locations Electrical Systems Kohler Filter Part Numbers Briggs & Stratton Filter Part NumbersSituation Causes Remedy Mower CUT QualityDrive System Situation Causes Remedy Electrical System Date OIL Changed Date Engine Tuned Owner InformationSeries Part No