Marantz CDR510 manual Auto Track OFF, Silence gap, How to turn Auto Track on or OFF

AUTO TRACK

AUTO TRACK can be either ON or OFF.

AUTO TRACK OFF

When AUTO TRACK is OFF only manual tracks are recorded by pressing and releasing the TR. INCR button on the IR remote, incrementing the track via the RC-5 signal, or RS-232C control, or by pressing and releasing the Record button on the CDR510 or the REC button on the IR remote.

Track information in the audio source such as a CD being dubbed is not recorded.

AUTO TRACK ON

When AUTO TRACK is ON and you are record- ing from a digital source with user data (track information from a source with a SPDIF connec- tion) the track information is recorded.

When AUTO TRACK is ON and the digital source does not include track ids, the CDR510 will use a silence gap to mark a track.

A track can also be incremented by pressing and releasing the TR. INCR button on the IR remote, incrementing the track via the RC-5 signal, or RS-232C control, or by pressing and releasing the Record button on the CDR510 or the REC button on the IR remote. See table on page 32.

Silence gap

With Auto Track ON, when a (silence gap) is detected for more than 2 seconds, the CDR510 will increment a new track when signal is detected at the threshold levels outlined below.

				Track increment
Audio source signal			silence
			gap
			2 sec
	Analog source -40dB
	Digital source -80dB
		track x			track x+1

If AUTO STOP is also ON no more than 20 sec- onds of silence will be recorded from an analog source and 4 seconds from a digital source.

The chart below will help identify how a source will be handled by the AUTO TRACK system.

SOURCE	AUTO TRACK ON
CD/MD	Track increment based on user data
(with user data)	of incoming signal.
DAT/DCC	Track increment based on user data
(with user data)	of incoming signal.
Unknown	Track increment after silence gap of
(no user data)	2 seconds on incoming signal.
Analog	Track increment after silence gap of
	2 seconds on incoming signal.
No source	None
(no lock)

How to turn AUTO TRACK ON or OFF

1.With the CDR drive selected push and re- lease the MENU/STORE button.

2.Turn the REC LEVEL/SELECT control until AUTO TRACK is displayed.

	L	CD
ANALOG	R

3.Push and release the REC LEVEL/SELECT control. ON or OFF is displayed.

4.Turn the REC LEVEL/SELECT control to toggle between ON and OFF.

	L	CD
ANALOG	R

5.When correct push and release the REC LEVEL/SELECT control. AUTO TRACK is displayed again.

6.Turn the REC LEVEL/SELECT control to switch to other menu choices or press and release the CANCL/DELETE button to exit menu mode.

- 31 -