Dixon 12828-0603, ZTR 2700 manual Headlight Adjustment

Page 33

CARE AND MAINTENANCE

HEADLIGHT ADJUSTMENT

1.Loosen the 1/2” retaining nut underneath the headlight and slide the headlight forward out of the recessed area of the fuel tank.

2.Loosen the 1/2” nut on the “U” shaped holding bracket and swivel the headlight vertically to adjust the height of the beam. Tighten the bracket nut.

3.Replace headlight into recessed area of the fuel tank.

4.Swivel the headlight horizontally to illuminate the desired area and tighten the headlight retaining nut.

33

Image 33

Contents Model Important Read Carefully D E Safety Safety Alert Symbol General Operation General Operation On it, do not mow it Slope OperationDo not Slope OperationI L D R E N R V I C E Service Dixon Limited Warranty Policy Commercial Models 2700 Series Model SpecificationsControl Levers ControlsParking Brake Mower Deck CUT Height Lift LeverA T Ignition Switch Mower Blade SwitchChoke Control Lever Throttle Control LeverControls Before Operating Mower Operation InstructionsTesting of Safety Interlock Systems Interlock Switch Test Stopping Instructions Starting InstructionsMowing Instructions Grass Height and Cutting Suggestions Springs To Lift SeatTo Free Wheel Machine Unlock Transmission Maintenance Schedule Care and MaintenanceBattery EngineTires Belts Mower BladesLubrication Dirt or water in oil can ruin Hydrostatic transmissions Checking & Replenishing OIL in Hydrostatic TransmissionParking Brake Adjustment Headlight Adjustment Hydrostatic Pumps Hydrostat Drive Belt Replacement ProcedureTo adjust neutral Steering Control AdjustmentsTo adjust steering control levers Steering Control AdjustmentsSteering Control Adjustments Leveling the Deck Kawasaki AIR and OIL Filter ZTR ModelTroubleshooting Engine Backfires Electrical Systems Owner F O R M a T I O N ZTRMowers