Dixon 30 manual Specifications, SpeedZTR

	SPECIFICATIONS
		SpeedZTR™ 30
Chassis:	11 gauge welded channel frame
Body:	Body parts are made of rotational molded polyethylene.
Mower Deck:	11 gauge stamped steel construction. Single 30” cut
	blade. Cut height approximately 1-1/2” - 4” via 7-
	position lift handle.
Blade Drive:	Mechanical; hand lever engagement.
Transmission:	Each rear wheel is independently driven by a Hydro
	Gear EZT self contained hydrostatic drive.
Engine:	13 HP Briggs & Stratton Intek, 4-cycle, single cylinder,
	air-cooled, gasoline, vertical shaft, aluminum head and
	block, cast iron sleeve, AVS balanced.
Starting	Electric-key switch operation with safety interlock
System:	on parking brake, steering levers and blade drive.
Tires:	Front 11 x 4.00-5 smooth tread (16-21 PSI)
	Rear 18 x 6.50-8 turf tread (8-14 PSI)
Capacities:	Fuel	.75 gallon
	Engine Oil	1.25 quarts
Dimensions:	Width	33.5” outside rear wheel measurement
	Width	38” overall width of deck with deflector
	Height	40.25” to top edge of seat
	Length	67” hitch tab to front
	Weight	393 lbs.

Additional information may be provided elsewhere in this manual.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

17