Dixon 30 manual Grass Height & Cutting Suggestions

Page 31

OPERATION INSTRUCTIONS

GRASS HEIGHT & CUTTING SUGGESTIONS:

Do not attempt to cut grass when it is wet.

If the grass is tall, place the mower deck cut height lever in the top or second notch. “Initially” overlap cutting swaths instead of a full swath with each pass. Some applications may require a second cutting.

Keep the underside of the mower deck clean.

Maintain sharp blades throughout the cutting season.

As a rule of thumb, never cut off more than 1/3 of the total grass blade length. Correct mowing height can reduce weeds and disease by 50% to 80%.

The following grass cut heights are based on adequate moisture conditions and normal thatch build-up in a healthy lawn. Some locations and applications may require slightly different cut heights. If in doubt, consult your local lawn professional for assistance.

Grass Types

Best Cut Heights

Bermudagrass

1 - 2”

Bluegrass

2 - 3”

Buffalograss

11/2 -3”

Ryegrass

2 - 3”

Tall Fescue

3-31/2

Zoysiagrass

1 - 3”

31

Image 31
Contents Safety Instructions Operator’s Manual Important Read Carefully Table of Contents Safety Safety Alert Symbol General Operation General Operation General Operation Slope Operation Slope Operation Do not Fire Hazards Fire Hazards Children Service Dixon ZTR Residential Warranty Policy SpeedZTR SpecificationsControl Levers ControlsTo SET Parking Brake Parking BrakeTransmission Drive System Throttle Control Lever Blade DriveMower Deck CUT Height Lift Lever Before Operating Mower Operation InstructionsStarting Instructions To Free Wheel Machine Unlock Transmission Towing Trailers and Other AttachmentsParking Brake Switch Test Testing of Safety Interlock SystemsEngine should Stop Mowing with a Mulching Attachment Mowing with a Mulching Attachment Mowing with a Grass Catcher Attachment Failure to observe the following instructions Mowing with a Grass Catcher AttachmentSide Discharge of the Clippings Grass Height & Cutting Suggestions Maintenance Schedule Care and MaintenanceCutter Blade Maintenance Engine BatteryLubrication TiresChanging the Engine OIL OIL Fill Belt Tension BeltsNeutral Adjustment Illustration a Illustration B Mower Deck Leveling Procedure Deck Removal Electrical Systems Cleaning the MowerWarranty PARTS/SERVICEEngine WON’T Turn Over TroubleshootingMower Loses Power or Transmission Overheats Blades Standard Service Parts ListEngine AIR and OIL Filters Date OIL Changed Date Engine Tuned OWNER’S InformationSpeedZTR