New instructions & graphics, Leveling the Deck

LEVELING THE DECK

A.Set the tire pressure on all four tires.

B.Move the tractor to a hard, level surface (i.e. concrete or blacktop).


Place a 2x4	board under all four corners of the deck shell, just inside
of the anti-scalping		wheels. Lower the deck down onto the boards.
The deck must rest on the		boards, not the anti-scalping sheels.
Adjust the deck hangers longer or shorter			until the deck "just"
comes off of the boards. Remove the boards and verify that				the
deck is hanging on all four deck hangers, re-adjust if necessary. Lock the
jam nuts on the deck hangers. (Note: the two rear deck hangers will be
	new instructions & graphics.
easier to	adjust in the	fender skirts are removed).

Rear Deck Hanger

(one each side)

Front Deck

Hanger

(one each

side)

2 x 4 board, one each corner, just inside of anti-scalping wheel