Dixon 5501 manual Operation Instructions

Page 17

OPERATION INSTRUCTIONS: (Continued)

BRAKING:

To brake mower, move both levers in direction opposite of travel, release levers to neutral, set parking brake. Park only on level surfaces.

GROUND SPEED:

Ground speed (controlled by movement of hand levers) must be carefully controlled for safety and best mowing results. Never operate at high speed in unfamiliar areas or on slopes.

CHOKE CONTROL LEVER:

Used to start a cold engine. (Engine has not been operated for a length of time). Located on control panel to operators right.

THROTTLE CONTROL LEVER:

Controls engine speed, slow to maximum. Lever should be set to the maximum or wide open setting to insure adequate cooling of the engine and to maintain mower deck blade speed while mowing.

MOWER DECK CUT HEIGHT LIFT LEVER:

Controls the cutting height of the mower deck. Seven positions of adjustment in which the very top, or highest notch, is used for transporting the mower in a non-mowing situation. Located in front of operator on the right side of mower.

BLADE DRIVE:

To engage the mower deck cutter blades, lift switch up lightly and push forward. To disengage blades, pull switch backward. Switch is clearly marked "on and off".

CIRCUIT BREAKER:

Protection of the electrical system is by (1) 15 amp circuit breaker. If circuit breaker engages, push button to reset. If this condition repeats, consult dealer for inspection and repair.

Page 14

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Page Important Read Carefully Index Safety Safety Reminders Read Carefully Before Operation Safety Reminders Dixon Limited Warranty Policy HYDRO-GEAR Models Specifications SET UP and Service Do not Tighten Securely Seat Assembly InstructionsSeat Assembly Instructions Upper Control Lever Installation Mower Deck Installation Mower Deck Leveling Procedure Mower Deck Deflector Final PreparationOperation Instructions Operation Instructions Care and Maintenance Model Procedure for Electric Clutch Adjustment Reverse procedure to re-install deck assembly Care and Maintenance ModelDrive System Adjustments Adjustment Points for T-BOX Belt Tension Forward Lever Stop Adjustment Chassis and Mower Deck Number of grease zerks used Cleaning the Mower Troubleshooting Drive System Electrical System Situation Causes Remedy Page Page Page Page Page Page Page ZTR 5501 Parts List 3669 Decal Caution 3322 ZTR 5501 Parts List ZTR 5501 Parts List Page Page FAX 316 251

5501 specifications

The Dixon 5501 is a versatile and robust device designed for both industrial and commercial applications. This model is renowned for its precision, durability, and advanced features, making it a popular choice among professionals in various industries.

One of the main features of the Dixon 5501 is its high-performance capability. It is equipped with an advanced processing unit that allows for swift data processing and operational efficiency. This ensures that users can execute tasks with minimal delay, which is critical in time-sensitive environments. The device’s user interface is intuitive, featuring a clear display and easy-to-navigate controls designed for user-friendliness, allowing operators to access a wide array of functions effortlessly.

In terms of connectivity, the Dixon 5501 stands out with its support for multiple communication protocols, including Bluetooth and Wi-Fi, making it easy to integrate into existing systems. This connectivity ensures that data transfer is seamless, enabling real-time monitoring and remote management. The capability to connect with various external devices enhances its functionality and adaptability in various operational settings.

Another key characteristic of the Dixon 5501 is its robust construction. Designed to withstand challenging environments, it features an IP-rated enclosure, making it resistant to dust and water ingress. This durability is crucial for users who operate in harsh conditions, ensuring the longevity and reliability of the device.

The Dixon 5501 also incorporates cutting-edge technology in terms of data handling and analysis capabilities. It has advanced analytics features that allow users to derive insights from collected data, supporting proactive decision-making processes. This is particularly valuable in sectors such as logistics, manufacturing, and environmental monitoring, where data-driven decisions are key to operational success.

Additionally, safety and compliance are significant aspects of the Dixon 5501. It adheres to rigorous industry standards and regulations, ensuring that users can trust the device for critical applications. The combination of safety features and robust technology makes it a reliable choice for businesses aiming to enhance productivity while maintaining high safety standards.

In summary, the Dixon 5501 is a powerful device characterized by its performance, connectivity, durability, and advanced analytical capabilities. These features make it an invaluable tool for professionals seeking efficiency and reliability in their operations.
Top Page Image Contents