Dixon 5501 manual Mower Deck Leveling Procedure

Page 14

MOWER DECK LEVELING PROCEDURE

LEVELING PRINCIPALS:

A.There are a total of (4) threaded adjusters which will control the attitude or pitch of the mower deck. The adjusters have lock nuts on the bottom which can be turned up or down to raise or lower the front and rear of the mower deck. Deck should be level or pitched slightly higher in rear.

LEVELING THE DECK:

A.Place the mower on a smooth level surface, check tire pressures to insure the mower has a correct stance. Inflate tires as required: Front - 19 - 21 Ibs maximum Rear- 10- 14 Ibs maximum

B.Rotate or turn each outer blade tip to align with the edge of the deck or side to side.

C.Measure from the surface up to the bottom of the blade tip on the discharge side of the mower deck. Retain this measurement. Move to the opposite side, check that measurement is the same. If adjustment is required, turn the nut on the bottom of the front threaded adjuster up or down until both side to side measurements are equal. Retain measurement.

D.Rotate or turn both outer blades to align with the deck in front to rear manner. Move to the left rear threaded adjuster, "left rear is designated from operator position on the mower". Turn adjuster nut up or down until rear of mower deck is positioned level to 1/8th of an inch higher than the side to side measurement. At this time, the mower deck will hang or be suspended on (3) points. Move the right rear adjuster and take out the slack which will be present by turning adjuster lock nut up. Confirm the measurement used on the left rear of the deck.

NOTEThis will place the mower deck in a base measurement position. Additional adjustment may be required to achieve desired cut for the type of grass or conditions being mowed.

Page 11

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Page Important Read Carefully Index Safety Safety Reminders Read Carefully Before Operation Safety Reminders Dixon Limited Warranty Policy HYDRO-GEAR Models Specifications SET UP and Service Seat Assembly Instructions Do not Tighten SecurelySeat Assembly Instructions Upper Control Lever Installation Mower Deck Installation Mower Deck Leveling Procedure Final Preparation Mower Deck DeflectorOperation Instructions Operation Instructions Care and Maintenance Model Procedure for Electric Clutch Adjustment Care and Maintenance Model Reverse procedure to re-install deck assemblyDrive System Adjustments Adjustment Points for T-BOX Belt Tension Forward Lever Stop Adjustment Chassis and Mower Deck Number of grease zerks used Cleaning the Mower Troubleshooting Drive System Electrical System Situation Causes Remedy Page Page Page Page Page Page Page ZTR 5501 Parts List 3669 Decal Caution 3322 ZTR 5501 Parts List ZTR 5501 Parts List Page Page FAX 316 251

5501 specifications

The Dixon 5501 is a versatile and robust device designed for both industrial and commercial applications. This model is renowned for its precision, durability, and advanced features, making it a popular choice among professionals in various industries.

One of the main features of the Dixon 5501 is its high-performance capability. It is equipped with an advanced processing unit that allows for swift data processing and operational efficiency. This ensures that users can execute tasks with minimal delay, which is critical in time-sensitive environments. The device’s user interface is intuitive, featuring a clear display and easy-to-navigate controls designed for user-friendliness, allowing operators to access a wide array of functions effortlessly.

In terms of connectivity, the Dixon 5501 stands out with its support for multiple communication protocols, including Bluetooth and Wi-Fi, making it easy to integrate into existing systems. This connectivity ensures that data transfer is seamless, enabling real-time monitoring and remote management. The capability to connect with various external devices enhances its functionality and adaptability in various operational settings.

Another key characteristic of the Dixon 5501 is its robust construction. Designed to withstand challenging environments, it features an IP-rated enclosure, making it resistant to dust and water ingress. This durability is crucial for users who operate in harsh conditions, ensuring the longevity and reliability of the device.

The Dixon 5501 also incorporates cutting-edge technology in terms of data handling and analysis capabilities. It has advanced analytics features that allow users to derive insights from collected data, supporting proactive decision-making processes. This is particularly valuable in sectors such as logistics, manufacturing, and environmental monitoring, where data-driven decisions are key to operational success.

Additionally, safety and compliance are significant aspects of the Dixon 5501. It adheres to rigorous industry standards and regulations, ensuring that users can trust the device for critical applications. The combination of safety features and robust technology makes it a reliable choice for businesses aiming to enhance productivity while maintaining high safety standards.

In summary, the Dixon 5501 is a powerful device characterized by its performance, connectivity, durability, and advanced analytical capabilities. These features make it an invaluable tool for professionals seeking efficiency and reliability in their operations.
Top Page Image Contents