Dixon 8000D manual Headlight Adjustment

Page 33

CARE AND MAINTENANCE

HEADLIGHT ADJUSTMENT:

1.Loosen the 1/2” retaining nut underneath the headlight and slide the headlight forward out of the fuel tank.

2.Loosen the 1/2” nut on the “U” shaped

holding bracket and swivel the headlight vertically to adjust the height of the beam. Tighten the bracket nut.

3.Replace headlight in fuel tank.

4.Swivel the headlight horizontally to illuminate the desired area and tighten the headlight retaining nut.

33

Image 33
Contents 8000D Series Important Read Carefully Index Blade Contact TIP Over RUN Over Back Over SafetySafety Alert Symbol General Operation General Operation Do not Slope OperationNever allow children to operate the mower ChildrenService Service Dixon Limited Warranty Policy Commercial Models Series Diesel Version SpecificationsControl Levers ControlsMower Deck Lift Parking BrakeSeat Ignition Switch Mower Blade SwitchThrottle Control Lever Circuit BreakerControls Before Operating Mower Operation InstructionsTesting of Safety Interlock Systems Interlock Switch Test Stopping Instructions Starting InstructionsNo one near Mowing InstructionsGrass Height and Cutting Suggestions Do not attempt to cut grass when it is wetSprings To Lift SeatTo Free Wheel Machine Unlock Transmission Maintenance Schedule Care and MaintenanceBattery EngineTires Belts Mower BladesLubrication Dirt or water in oil can ruin Hydrostatic transmissions Checking & Replenishing OIL in Hydrostatic TransmissionParking Brake Adjustment Headlight Adjustment Replacement Procedure Hydrostatic PumpsHydrostat Drive Belt Hydrostat Drive Belt Replacement Procedure To adjust neutral Steering Control AdjustmentsSteering Control Adjustments Care and Maintenance Leveling the Deck Engine WON’T Turn Over TroubleshootingEngine Overheated Standard Service Parts List Model ZTR 8026DBriggs & Stratton AIR and OIL Filter Part Numbers Name Address Owner InformationZTRMowers