Dixon 8000D manual Hydrostat Drive Belt Replacement Procedure

Page 35

CARE AND MAINTENANCE

HYDROSTAT DRIVE BELT

REPLACEMENT PROCEDURE:

To install hydrostat pump drive belt:

1.Rotate the spring loaded take-up idler towards the left hand hydro pump.

2.Install belt per diagram.

3.Install double u-joint and tighten flange bolts (tighten to 14 ft. lbs.).

4.Install radiator and mounting hardware.

5.Attach radiator hoses and refill cooling system.

35

Image 35

Contents 8000D Series Important Read Carefully Index Blade Contact TIP Over RUN Over Back Over SafetySafety Alert Symbol General Operation General Operation Do not Slope OperationNever allow children to operate the mower ChildrenService Service Dixon Limited Warranty Policy Commercial Models Series Diesel Version SpecificationsControl Levers ControlsMower Deck Lift Parking BrakeSeat Circuit Breaker Mower Blade SwitchIgnition Switch Throttle Control LeverControls Before Operating Mower Operation InstructionsTesting of Safety Interlock Systems Interlock Switch Test Stopping Instructions Starting InstructionsNo one near Mowing InstructionsGrass Height and Cutting Suggestions Do not attempt to cut grass when it is wetSprings To Lift SeatTo Free Wheel Machine Unlock Transmission Maintenance Schedule Care and MaintenanceTires BatteryEngine Belts Mower BladesLubrication Dirt or water in oil can ruin Hydrostatic transmissions Checking & Replenishing OIL in Hydrostatic TransmissionParking Brake Adjustment Headlight Adjustment Hydrostat Drive Belt Replacement ProcedureHydrostatic Pumps Hydrostat Drive Belt Replacement Procedure To adjust neutral Steering Control AdjustmentsSteering Control Adjustments Care and Maintenance Leveling the Deck Engine WON’T Turn Over TroubleshootingEngine Overheated Briggs & Stratton AIR and OIL Filter Part Numbers Standard Service Parts ListModel ZTR 8026D Name Address Owner InformationZTRMowers