Dixon 8000G Series manual Headlight Adjustment

Page 33

CARE AND MAINTENANCE

HEADLIGHT ADJUSTMENT

1.Loosen the 1/2” retaining nut underneath the headlight and slide the headlight forward out of the fuel tank.

2.Loosen the 1/2” nut on the “U” shaped holding bracket and swivel the headlight vertically to adjust the height of the beam. Tighten the bracket nut.

3.Replace headlight in fuel tank.

4.Swivel the headlight horizontally to illuminate the desired area and tighten the headlight retaining nut.

33

Image 33

Contents 8000G Series Important Read Carefully Index Blade Contact TIP Over RUN Over Back Over SafetySafety Alert Symbol General Operation General Operation Do not Slope OperationNever allow children to operate the mower ChildrenService Service Dixon Limited Warranty Policy Commercial Models Series Gas Version SpecificationsControl Levers ControlsMower Deck Lift Parking BrakeSeat Ignition Switch Mower Blade SwitchChoke Control Lever Throttle Control LeverControls Before Operating Mower Operation InstructionsTesting of Safety Interlock Systems Interlock Switch Test Stopping Instructions Starting InstructionsMowing Instructions Grass Height and Cutting Suggestions Springs To Lift SeatTo Free Wheel Machine Unlock Transmission Maintenance Schedule Care and MaintenanceBattery EngineTires Belts Mower BladesLubrication Dirt or water in oil can ruin Hydrostatic transmissions Checking & Replenishing OIL in Hydrostatic TransmissionParking Brake Adjustment Headlight Adjustment Hydrostatic Pumps Hydrostat Drive Belt Replacement ProcedureTo adjust neutral Steering Control AdjustmentsSteering Control Adjustments Care and Maintenance Leveling the Deck Standard Service Parts List Model ZTRKohler AIR and OIL Filter Part Numbers Engine WON’T Turn Over TroubleshootingEngine Backfires Page Owner Information ZTRMowers