Dixon 52 manual Service

Page 15

WARNING

Failure to observe the following safety instructions could result in serious injury or death.

SERVICE:

Never run a mower inside a closed area or without proper ventilation.

Keep nuts and bolts tight, especially blade attachment bolts, and keep equipment in good condition.

Never tamper with safety devices. Check their proper operation regularly.

Stop and inspect the equipment if you strike an object. Repair, if necessary, before restarting.

Never make adjustments or repairs with the engine running unless otherwise specified.

Grass catcher components are subject to wear, damage and deterioration which could expose moving parts or allow objects to be thrown. Frequently check components. Replace with original equipment parts when necessary.

Mower blades are sharp and can cut. Wrap blades or wear gloves, and use extra caution when servicing them.

Batteries contain sulfuric acid. To prevent burns, avoid contact with skin, eyes and clothing.

15

Image 15
Contents Kodiak ZTR Important Read Carefully Table of Contents Safety Safety Alert Symbol General Operation General Operation General Operation Slope Operation Slope Operation Do not Fire Hazards Fire Hazards Children Service Dixon ZTR PRO Series COMMERCIAL/RESIDENTIAL Warranty Policy Kodiak SpecificationsSeat Adjustment Instructions Control Levers ControlsParking Brake To SET Parking BrakeMower Deck CUT Height Lift Lever Choke and Throttle Control Levers Blade DriveBefore Operating Mower Operation InstructionsStarting Instructions Parking Brake Switch Test Testing of Safety Interlock SystemsEngine should Stop Mowing with a Mulching Attachment Mowing with a Mulching Attachment Mowing with a Grass Catcher Attachment Failure to observe the following instructions Mowing with a Grass Catcher AttachmentSide Discharge of the Clippings Grass Height & Cutting Suggestions Do not attempt to cut grass when it is wetTo Free Wheel Machine Unlock Transmission Towing Trailers and Other AttachmentsMaintenance Schedule Care and MaintenanceCutter Blade Maintenance Engine BatteryLubrication TiresBelts Changing the Engine OIL OIL Filters OIL FillRecommended Fluid Hydrostatic Transmission Fluid Filter ServiceHydrostat Fluid Maintenance Procedure Neutral Adjustment Electrical Systems Cleaning the MowerWarranty PARTS/SERVICEMower Deck Leveling Procedure Mower Deck Leveling Procedure Engine WON’T Turn Over TroubleshootingMower Loses Power or Transmission Overheats Engine AIR and OIL Filters Standard Service Parts ListDate OIL Changed Date Engine Tuned OWNER’S InformationDixon and ZTR are registered trademarks of Dixon