Dixon 52 manual To SET Parking Brake, Mower Deck CUT Height Lift Lever

Page 20

CONTROLS

PARKING BRAKE:

The parking brake is designed to hold the mower from moving and is not intended for use in stopping the mower while it is in motion. The engine will stop if the parking brake is engaged while the control levers are in the drive position.

	CAUTION	Engage parking brake
	CAUTION	before starting engine.
		before starting engine.

TO SET PARKING BRAKE:

The hand operated parking brake is located on the left hand side of the mower.

•To engage brake, pull lever up (to the rear).

•To release brake, move lever forward (down).

Note: Always set parking brake before dismounting.

Release parking brake before moving mower.

MOWER DECK CUT HEIGHT LIFT LEVER:

•Located to the right and front of the operator.

•Controls the cutting height.

•Fifteen positions of adjustment

•Depress trigger and move lever forward to lower deck.

•Depress trigger and pull lever back to raise deck.

Note: Always use high position for transport.

20

Image 20

Contents Kodiak ZTR Important Read Carefully Table of Contents Safety Safety Alert Symbol General Operation General Operation General Operation Slope Operation Slope Operation Do not Fire Hazards Fire Hazards Children Service Dixon ZTR PRO Series COMMERCIAL/RESIDENTIAL Warranty Policy Specifications KodiakSeat Adjustment Instructions Controls Control LeversMower Deck CUT Height Lift Lever Parking BrakeTo SET Parking Brake Blade Drive Choke and Throttle Control LeversOperation Instructions Before Operating MowerStarting Instructions Testing of Safety Interlock Systems Parking Brake Switch TestEngine should Stop Mowing with a Mulching Attachment Mowing with a Mulching Attachment Mowing with a Grass Catcher Attachment Mowing with a Grass Catcher Attachment Failure to observe the following instructionsSide Discharge of the Clippings Do not attempt to cut grass when it is wet Grass Height & Cutting SuggestionsTowing Trailers and Other Attachments To Free Wheel Machine Unlock TransmissionCare and Maintenance Maintenance ScheduleCutter Blade Maintenance Battery EngineTires LubricationBelts Changing the Engine OIL OIL Fill OIL FiltersHydrostatic Transmission Fluid Filter Service Recommended FluidHydrostat Fluid Maintenance Procedure Neutral Adjustment Cleaning the Mower WarrantyPARTS/SERVICE Electrical SystemsMower Deck Leveling Procedure Mower Deck Leveling Procedure Troubleshooting Engine WON’T Turn OverMower Loses Power or Transmission Overheats Standard Service Parts List Engine AIR and OIL FiltersOWNER’S Information Date OIL Changed Date Engine TunedDixon and ZTR are registered trademarks of Dixon