Dixon 13092-0901 manual Specifications, Series Gas Version

	SPECIFICATIONS
	8000 Series (Gas Version)
CHASSIS:	11 GA - rectangular tube, 7 GA reinforcement
SEAT:	Designed for operator comfort with padded back & arm
	rests. Seat is adjustable fore & aft. Seat back tilts. Mounted
	on operator suspension system with damper.
MOWER DECK:	2 decks are available. Both decks are made of 10 GA
	fabricated welded construction with 1/4 " reinforcement
	plate. 3bladescombinefor eithera60"or 72"cutwidth. Deep
	deck with discharge tunnel. Cut height approximately 1.5" to
	6" via 10 position lift handle.
BLADE DRIVE:	"V" Belt with Electric clutch
DRIVE SYSTEM:	Each rear wheel is independently driven by a HydroGear BDP-
	10A pump and White CE wheel motor.
ENGINE:	25HP Kohler Command, 4-Cycle, V-Configuration, Overhead
	Valve, Air-Cooled, Gasoline, Horizontal Shaft, Aluminum Head
	and Crankcase with Cast Iron Liners, Full Pressure
	Lubrication/Full Flow Filter, Pulse-type Fuel Pump, Fixed Jet
	Carburetor, Electronic Ignition, In-Line Fuel Filter, Dual Element
	Air Cleaner.
STARTING SYSTEM:	Electric by key switch operation with safety interlocks on
	parking brake, blade drive clutch and control levers.
TIRES:	Front	13-6.5x6
	Rear	23-10.5x12
RECOMMENDED	Front	16-20 lbs.
TIRE PRESSURE:	Rear	8-14 lbs.
CAPACITIES:	Fuel - 11 gallons (approx)
	Hydrostat oil system - 4 quart with in-line 40 micron filter
	Hydrostat oil recommendation - SAE 20W50 motor oil
	Engine - 2 quart. SAE 10W30 motor oil
DIMENSIONS:	Width	73.5"(60" Deck), 85.5"(72" Deck)
	Height	54"
	Length	87"
	Weight	1020 lbs.(60" Deck), 1054 lbs.(72" Deck)

NOTE: Additional information provided in service instructions under the individual component.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

13