Dixon 13092-0901 manual Headlight Adjustment

Page 33

CARE AND MAINTENANCE

HEADLIGHT ADJUSTMENT

1.Loosen the 1/2ā€ retaining nut underneath the headlight and slide the headlight forward out of the fuel tank.

2.Loosen the 1/2ā€ nut on the ā€œUā€ shaped holding bracket and swivel the headlight vertically to adjust the height of the beam. Tighten the bracket nut.

3.Replace headlight in fuel tank.

4.Swivel the headlight horizontally to illuminate the desired area and tighten the headlight retaining nut.

33

Image 33
Contents Manual Important Read Carefully Index Safety Safety Alert Symbol General Operation General Operation Do not mow it Slope OperationNever allow children to operate the mower ChildrenService Service Dixon Limited Warranty Policy Commercial Models Series Gas Version SpecificationsControl Levers ControlsMower Deck Lift Parking BrakeSeat Ignition Switch Mower Blade SwitchChoke Control Lever Throttle Control LeverControls Before Operating Mower Operation InstructionsTesting of Safety Interlock Systems Interlock Switch Test Stopping Instructions Starting InstructionsMowing Instructions Grass Height and Cutting Suggestions Springs To Lift SeatTo Free Wheel Machine Towing Maintenance Schedule Care and MaintenanceBattery EngineTires Belts Mower BladesLubrication Dirt or water in oil can ruin Hydrostatic transmissions Checking & Replenishing OIL in Hydrostatic TransmissionParking Brake Adjustment Headlight Adjustment Hydrostatic Pumps Hydrostat Drive Belt Replacement ProcedureTo adjust neutral Steering Control AdjustmentsSteering Control Adjustments To adjust In position of the steering controls Leveling the Deck Kohler AIR and OIL Filter Part Numbers Model ZTRTroubleshooting Engine Backfires Page Owner Information ZTRMowers