SPECIFICATIONS
| Model | ZTR 3304 |
CHASSIS: | Twin 12 gauge side frames and 7 gauge transmission | |
| and engine base plate. | |
BODY: | All body parts are made of rotational molded poly- | |
| ethylene. Front body contains access panel for | |
| battery service. Seat tilts forward to allow trans- | |
| mission service. | |
MOWER DECK: | 11 GA stamped steel construction. Single 30" cut | |
| blade. Cut height approximately 1" to 4" via 7 position lift | |
| handle. |
|
BLADEDRIVE: | Mechanical; hand lever engagement. | |
TRANSMISSION: | Each rear wheel is independently driven by chain and | |
| sprockets through a friction mechanical drive. | |
ENGINE: | 13.5 HP Briggs & Stratton | |
| Cylinder, Overhead Valve, | |
| Vertical Shaft, Cast Iron Cylinder, AVS (Anti Vibration | |
| System), Pressure Lube & Filter | |
STARTING SYSTEM: | Electric by key switch operation with safety interlocks on | |
| parking brake and blade drive. | |
TIRES: | Front | 11 X |
| Rear | 16 X |
RECOMMENDED | Front | |
TIRE PRESSURE: | Rear | |
CAPACITIES: | Fuel | 2.0 gallons total. |
| Engine | 1.25 quarts oil. |
DIMENSIONS: | Width | 32.5" outside rear wheel measurement. |
| Height | 32.0" to top edge of seat. |
| Length | 65.5" hitch tab to front bumper. |
| Weight | 440 lbs. |
Additional information provided in service instructions under the individual component.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
14