| SPECIFICATIONS | |
| Model ZTR 3014 | |
CHASSIS: | Twin 12 gauge side frames and 7 gauge transmission | |
| and engine base plate. | |
BODY: | All body parts are made of rotational molded polyethyl- | |
| ene. Front body contains access panel for battery | |
| service. Seat tiltsforwardtoallowtransmissionservice. | |
MOWERDECKS: | 36" Deck: 11 GA Laser Cut Fabricated - 36" Cut Width | |
| 42" Deck: 13 GA Stamped Steel Construction - 42" Cut | |
| WidthCutheightapprox.1"to4"via7positionlifthandle. | |
BLADEDRIVE: | Electricclutch. | |
TRANSMISSION: | Each rear wheel is independently driven by chain and | |
| sprockets through a friction mechanical drive. | |
ENGINE: | 13.5HPBriggs&Stratton | |
| Overhead Valve, | |
| CastIronCylinder,AVS(AntiVibrationSystem),Pressure | |
| Lube & Filter |
|
STARTING SYSTEM: | Electric by key switch operation with safety interlocks on | |
| parking brake and blade drive. | |
TIRES: | Front | 11 X 4.00 |
| Rear | 18 X |
RECOMMENDED | Front | |
TIRE PRESSURE: | Rear | |
CAPACITIES: | Fuel | 2.0 gallons total. |
| Engine | 1.25 quarts oil. |
DIMENSIONS: | Width | 43.0" outside rear wheel measurement. |
| Height | 36.0" to top edge of seat. |
| Length | 65.5" hitch tab to front bumper. |
| Weight | 36" Deck: 500 lbs. 42" Deck: 520 lbs. |
Additional information provided in service instructions under the individual component.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
15