The following sections provide the instructions needed to start the LSI Logic
Configuration Utility program and to format a SCSI hard disk drive.
Starting the LSI Logic Configuration Utility program
Complete the following steps to start the LSI Logic Configuration Utility program:
1.Turn on the server.
2.When the <<< Press <CTRL><C> to start LSI Logic Configuration Utility
>>> prompt appears, press Ctrl+C.
Note: If an administrator password has been set, you are prompted to type the password to start the LSI Logic Configuration Utility program.
3.Use the arrow keys to select a controller (channel) from the list of adapters; then, press Enter.
4.Follow the instructions on the resulting screen to change the settings of the selected items; then, press Enter. The Device Properties and Mirroring Properties choices produce additional screens of parameters to review or change.
Formatting a SCSI hard disk drive
You can use the LSI Logic Configuration Utility program to perform a
1.Select the controller channel for the drive to format from the list of adapters.
2.Select Device Properties from the resulting screen.
3.Use the arrow keys (— or
Attention:
4.Use the arrow keys (“ or ”) or the End key to scroll to the right.
5.Highlight the Format item; then, press Enter to begin the
Using the ServerGuide Setup and Installation CD
The ServerGuide Setup and Installation CD includes an
If a later version of the ServerGuide program is available, you can download a free image of the ServerGuide Setup and Installation CD, or you can purchase the CD. To download the image, go to the IBM ServerGuide Web page at
The ServerGuide program has the following features to make setup easier:
vAn
v
22IBM xSeries 235 Type 8671: User’s Guide