Using the Configuration/Setup Utility program
This section provides instructions to start the Configuration/Setup Utility program and descriptions of the available menu choices.
Starting the Configuration/Setup Utility program
To start the Configuration/Setup Utility program:
1.Turn on the server and watch the monitor screen.
2.When the message Press F1 for Configuration/Setup appears, press F1.
Note: If you have set both levels of passwords
3.Follow the instructions that appear on the screen.
Choices available from the Configuration/Setup main menu
From the Configuration/Setup Utility main menu, you can select settings that you want to view or change. The Configuration/Setup Utility main menu is similar to the following.
IBM Setup - (c) Copyright IBM Corporation 2002
Configuration/Setup Utility
System Summary
System Information
Devices and I/O Ports
Date and Time
System Security
Start Options
Advanced Setup
Error Logs
Save Settings
Restore Settings
Load Default Settings
Exit Setup
<F1> Help | < > < > Move |
<Esc> Exit | <Enter> Select |
Notes:
1.You can press F1 to display help information for a selected menu item.
2.The choices on some menus might differ slightly, depending on the BIOS version in your server.
Descriptions of the choices available from the main menu are:
vSystem Summary
Select this choice to display configuration information. This includes the type, speed, and cache sizes of the microprocessors and the amount of memory installed.
Changes that you make to configuration settings appear on this summary screen. You cannot edit the fields.
This choice appears on both the full and limited Configuration/Setup Utility menus.
16IBM xSeries 235 Type 8671: User’s Guide
