Rear view
This section identifies the indicators on the rear of your server. The following illustrations contain most of these indicators. The remaining indicators are illustrated in the “Working with adapters” section in the Option Installation Guide on the IBM xSeries Documentation CD.
Server with fixed power supply
AC power LED (green)
DC power LED (green)
|
| Fan 1 LED |
|
| Fan 2 LED |
|
| Ethernet link |
|
| status LED |
|
| |
|
| attention LED |
2 | 1 | |
|
| attention LED |
NMI button
(service use only)
Server with hot-swap power supplies
Power supply 1
AC power LED (green)
DC power LED (green)
Power supply 2
AC power LED (green)
DC power LED (green)
|
| Fan 1 LED |
|
| Fan 2 LED |
|
| Ethernet link |
|
| status LED |
|
| |
|
| attention LED |
2 | 1 | |
|
| attention LED |
NMI button
(service use only)
Fans 1 and 2 LEDs: These LEDs provide status information about rear fans 1 and
2.For additional information, see the section about the Light Path Diagnostics feature in the Hardware Maintenance Manual and Troubleshooting Guide on the IBM xSeries Documentation CD.
Ethernet link status LED: This LED is on the Ethernet connector. When this LED is on, there is an active connection on the Ethernet port.
10IBM xSeries 235 Type 8671: User’s Guide