Transition Networks E-TBT-HB-0804, 33022.B Installation, Unpacking the LANMaster T8, Part Number

3. INSTALLATION

To install the LANMaster T8:

•Unpack the LANMaster T8

•Install LANMaster T8 at site

•Install Network Cable

•Power the LANMaster T8.

Direction is provided in the pages that follow.

Unpacking the LANMaster T8

The LANMaster T8 packing contents should include the following:

Item	Part Number
LANMaster T8 Hub	E-TBT-HB-0804
	(includes mounting brackets and screws,
	BNC T-connector and terminator, and
	adhesive-backed rubber feet)
Power Supply Adapter	3532, 3533, 3534, 3535, or 3536
	(depending upon power configuration
	in country where installed)
User’s Guide	33022

Powering the LANMaster T8

To power ON the LANMaster T8:

1.Verify that the LANMaster T8 power supply adapter is the correct one for the site installation.

2.At LANMaster T8 back, locate the power receptacle.

3.Connect the LANMaster T8 power connector end of the power supply adapter to LANMaster T8 power receptacle.

4.Plug external power connector end (male) of the power supply adapter into correct voltage AC wall socket.

5.At LANMaster T8 front, verify that Act(ivity) LED is illuminated.

5 LANMaster™ T8 8-Port Ethernet™ Repeater Hub 14