Operating with the Remote Control
BREAK TIMER button
FREEZE button
MAGNIFY buttons
POINTER button
SPOT button
Adjustment buttons
(P/R/O/Q)
EFFECT button
PICTURE MODE button
ECO+QUIET button 
AUTO SYNC button
Displaying and Setting the Break Timer
1
Press BREAK TIMER.
•The timer starts to count down from 5 minutes.
2
Press P/R/O/Q to adjust the length of the break time.
• Increases with P or Q
5 minutes ➞ 6 minutes ➞ 60 minutes
• Shortens with O or R
4 minutes ➞ 3 minutes ➞1 minute
• The break time can be set in units of one 
minute (up to 60 minutes).
Canceling the break timer display function
Press BREAK TIMER.
Note
•The Break Timer is not available while the projector is operating the following functions.
-Auto Sync
-Freeze
-AV Mute
-Input Search
Displaying the Pointer
1
Press POINTER and press P/R/ O/Qon the remote control to move the pointer.
•Press EFFECT to change the pointer icon (5 types).
Star Finger1 Finger2 Heart Underline
2
Press POINTER again.
• The pointer will disappear.
Using the Spot Function
1
Press SPOT and press P/R/O/Q on the remote control to move the spot area.
•Press EFFECT to change the spot area size (3 types).
1/9 | 1/25 | 1/8 |
|
|
|
2
Press SPOT again.
• The spot area will disappear.
Switching the Eco+Quiet Mode
Press ECO+QUIET to switch the Eco+Quiet mode between on and off.
•When the Eco+Quiet Mode is set to “ON”, the sound of the cooling fan will turn down, the power consumption will decrease, and the lamp life will extend.
Note
• Refer to “Eco+Quiet” on page 43 for details.
32
