8 Keylock Function
Use this function to lock the operation buttons on the projector.
This function can be set using either the menu screen or ENTER on the projector.
a Setting with the menu screen
Selectable | Description | |
items | ||
| ||
|
| |
On | All buttons on the projector, except | |
| STANDBY/ON, are locked. | |
Off | Turns off the Keylock function. |
a Setting with the projector buttons
Locking the Operation Buttons
1
Hold down ENTER on the projector for about 5 seconds while the projector is being turned on.
• The Keylock function screen is displayed.
PRJ - ADJ1
Use this function to lock the operation buttons on the projector.
(Except STANBY/ON button)
Note: You can release the keylock by holding down
ENTER on the projector for about 5 seconds.
Return
On
SEL. | ENTER | END |
2
Select “On”, then press ENTER.
•The Keylock function does not affect the operation with the remote control buttons.
•You cannot use the Keylock function while the projector is warming up.
Menu operation n Page 39
Taking the Keylock Off
Hold down ENTER on the projector for about 5 seconds.
Info
•Even when Keylock function is set to “On”, STANDBY/ON on the projector can be used to turn on and off the power.
•Keylock cannot be set while the projector is: displaying the “Setup Guide” or “Menu” screens, in Standby mode, warming up, changing input signals, operating the Auto Sync or Input Search function, in Freeze mode or on the “System Lock” screen during warming up.
9 Selecting the Quick
Start Menu
Selectable items | Description |
|
|
On | Pressing MENU displays the |
| Quick Start Menu screen. |
|
|
Off | Pressing MENU displays the |
| Complete Menu screen. |
0 Setting the FUNCTION
Button Operation
You can assign one of the following functions to the FUNCTION button on the remote con- trol. The assigned function can be performed by just pressing FUNCTION.
|
| Useful Features |
Selectable items | mode. | |
Description |
| |
Input Search | Automatically searches for and |
|
| switches to the appropriate Input |
|
|
|
|
Audio Mute | For temporarily turning off the |
|
| sound. Press FUNCTION again |
|
| to turn on the sound |
|
Image Shift | For moving the projected image |
|
| vertically. (See page 46.) |
|
Signal Info | Input signal information is |
|
| displayed. |
|
51
