Sharp XR-55X, XR-50S appendix Standby Mode, Checking the Lamp Life Status

Adjusting the Projector Function (“PRJ-ADJ1/2” Menu) (Continued)

Menu operation n Page 39

STANDBY Mode

When set to “Eco”, power consumption is reduced in Standby mode.

Selectable	Description
items
Eco	The monitor output and RS-232C are
	switched off in Standby mode.
Quick Start	The monitor output and RS-232C are
	activated even if the projector is in
	Standby mode.

DLP® LinkTM (XR-55X only)

See the Operation Manual for Stereoscopic 3D Projection provided separately.

DLP® LinkTM Invert (XR-55X only)

See the Operation Manual for Stereoscopic 3D Projection provided separately.

Returning to the Default Settings

This function allows you to initialize the settings you have made in the projector.

Note

•The following items or menu cannot be initialized.

-Resolution

-Language

-Lamp Timer (Life)

-System Lock

Checking the Lamp Life Status

You can confirm the cumulative lamp usage time and the remaining lamp life (percentage).

Lamp usage condition		Remaining lamp life
	“Life”	100%	5%
Operated exclusively		Approx.	Approx.
with “Eco+Quiet”		4,000 hours	200 hours
set to “On”
Operated exclusively		Approx.	Approx.
with “Eco+Quiet”		2,000 hours	100 hours
set to “Off”

Note

•It is recommended that the lamp be changed when the remaining lamp life becomes 5%.

•The lamp life may vary depending on the usage condition.

52