Samsung YP-GI1CB Network Notification, WPS Button Connection, Touch WPS button connection

Network Notification

Have your device alert you to new Wireless Access Points (WAPs).

1.From a Home screen, touch (Menu) ➔ Settings

➔ Wireless and network.

2.Touch Wi-Fi settings, then touch Network notification to turn notifications On or Off. When on, a check mark

appears in the check box.

WPS Button Connection

The WPS (Wi-Fi Protected Setup) button is a standard for easy and secure wireless network set up and connections. To use WPS, the connecting device must support WPS and be compatible with Wi-Fi Protected Access (WPA) security. WPS can automatically set up a random network name and WPA wireless security for wireless Wi-Fi phones, routers, access points, computers, adapters, and other electronic devices. WPS allows you to push buttons instead of entering a network name and wireless security PIN.

1.From a Home screen, touch (Menu)

➔ Settings ➔ Wireless and network ➔ Wi-Fi settings.

2.Touch WPS button connection.

3.Press the WPS button on your Wi-Fi access point within 2 minutes.

Advanced Settings

Set up and manage wireless access points.

1.From a Home screen, touch (Menu) ➔ Settings

➔Wireless and network ➔ Wi-Fi settings.

2.Touch (Menu) ➔ Advanced for these settings:

• Advanced:

–Wi-Fi sleep policy: By default, Wi-Fi turns off when the screen times out and data connections switch to mobile data. Use Wi-Fi sleep policy settings to specify when to switch from Wi-Fi to mobile data for data communications. Touch to choose from When screen turns off, Never when plugged in, or Never.

–MAC address: View your device’s MAC address, required when connecting to some secured networks (not configurable).

–IP address: The Internet Protocol (IP) address assigned to the device by the Wi-Fi network to which you are connected unless the IP settings, below, are used to assign it a static IP address.

132