SVZ122(H1680).QX33 4/6/99 9:42 PM Page 28
28 Timer Recording (cont’d)
7
Press the PLAY button or the STOP button repeatedly until the desired channel number appears. Then, press the F.FWD button.
●If you are using a standard antenna/cable hookup (as shown on pages six - seven), select the channel of the TV program you
want to record.
●If you are recording from line input, select AUX.
●If you are using a Cable Box/DBS, select the Cable Box/DBS output channel (03 or 04). Select the channel you want to
record at the Cable Box/DBS. Leave the Cable Box/DBS on for | 10 | 1 | 2 | 3 |
| POWER |
| VCR/TV EJECT |
the timer recording. Details are on page eight.
ONE TIME PROGRAM
PROGRAM NUMBER | 1 |
| ||||
DATE | 0 5 | / 0 6 WED | ||||
START TIME | 0 7 | : 3 0 | P M | |||
END TIME | 0 8 | : 3 0 | P M | |||
CHANNEL |
| 16 |
|
|
|
|
|
|
|
|
| ||
REC SPEED |
| – – |
|
|
| |
8
Press the PLAY button or the STOP button repeatedly to select a tape speed. The arrow will appear beside your choice. The selected tape speed will flash beside REC SPEED.
ONE TIME PROGRAM |
| |||||
PROGRAM NUMBER | 1 |
| ||||
DATE | 0 5 | / 0 6 WED | ||||
START TIME | 0 7 | : 3 0 | P M | |||
END TIME | 0 8 | : 3 0 | P M | |||
CHANNEL | 1 6 |
|
|
| ||
REC SPEED |
| S P |
|
|
| LP |
|
|
|
| |||
| → SP | |||||
SLP
9
8
4 5 6
7 8 9 CHANNEL
0 +100
RENTAL AUTO CLOCK/
SPEED SELECTOR REPEAT COUNTER
MENU DISPLAY EXIT COUNTER
| RESET | MEMORY |
REWIND | / PLAY | F.FWD |
RECORD | / STOP | PAUSE/STILL |
7
9
Press the COUNTER RESET/EXIT button.
10
Press the POWER button to turn off the VCR. The TIMER light will appear. (The TIMER light will flash if there is not a tape in the VCR.)
If a timer recording will take place several hours or days from now, you may use the VCR until time for the timer recording. Just make sure you turn off the VCR about five minutes before the scheduled start time.
The VCR must be off for a
timer recording to take
place! Make sure a tape is in
the VCR.
Helpful Hints
•The TIMER PROGRAMMING menu will not appear at step 1 if the clock is not set. Follow the steps on pages 14 - 15 to set the clock.
•Enter the information while the space is flashing.
•Press the REWIND button to go back one step from the current step during steps
•To stop a started timer recording, press the STOP/EJECT button on the VCR.
More Helpful Hints are on page 38.
