Philips SVZ122 Hookups With a Cable Box / Direct Broadcast System cont’d, Helpful Hint

Models: SVZ122

1 44
Download 44 pages 15.98 Kb
Page 9
Image 9
Hookups With a Cable Box / Direct Broadcast System (cont’d) 9

SVZ122(H1680).QX33 4/6/99 9:42 PM Page 9

Hookups With a Cable Box / Direct Broadcast System (cont’d) 9

With this connection:

You may watch one channel while recording another.

You may not record scrambled channels.

1 VCR

ANT

IN

2 Cable Box/DBS

OUT

IN

OUT

VIDEO CH3 CH4

Cable

Signal

IN

Manual backgroundOUT

RF coaxial

cable

75V

 

ANT

/

CABLE

RF coaxial

cable

3 TV’s ANTENNA

IN Jack

Connections

1

Connect a Cable signal to the VCR’s ANT(enna) IN Jack.

2

Use an RF coaxial cable (supplied) to connect the OUT Jack on the VCR to the IN Jack on the Cable Box/DBS.

3

Use a second RF coaxial cable to connect the OUT Jack on the Cable Box/DBS to the ANTENNA IN Jack on the TV.

Recording One Channel/Watching Another

1

Put the Cable Box/DBS on the same channel as the VCR’s CH3/CH4 switch. Then, with the VCR in VCR position (the VCR/TV light will appear on the display panel), use the CHANNEL o/p buttons to select the channel you want to record at the VCR. Start the recording.

2

Press the VCR/TV button once to put the VCR in TV position. (The VCR/TV light will disappear.)

3

Set the TV to the Cable Box/DBS output channel (03 or 04).

4

Select the channel you want to watch at the Cable Box/DBS.

Helpful Hint

When you play a tape, make sure the Cable Box/DBS is set to the same channel as the CH3/CH4 switch on the VCR. Set the TV to the Cable Box/DBS output channel (03 or 04).

Page 9
Image 9
Philips SVZ122 owner manual Hookups With a Cable Box / Direct Broadcast System cont’d, Helpful Hint