Philips SVZ122 owner manual Recording, Helpful Hints, 1Turn on the TV 2 Insert a tape

Models: SVZ122

1 44
Download 44 pages 15.98 Kb
Page 24
Image 24
24 Recording

SVZ122(H1680).QX33 4/6/99 9:42 PM Page 24

24 Recording

Read and follow the steps below to record a television program.

1

Turn on the TV; set it to channel 3 or 4, whichever the CH3/CH4 switch on the back of the VCR is set to.

2

Insert a tape with its record tab intact (see page five) in the VCR. The POWER, VCR/TV, and CST.IN lights will appear.

3

If the VCR/TV light does not appear, press the VCR/TV button so that the VCR/TV light appears.

4

Press the SPEED button until the desired tape speed appears on-screen. The tape speed will disappear after about five seconds.

You can change the tape speed while the VCR is recording, but some distortion may appear on the tape. Details about tape speed are on page 40.

5

Use the CHANNEL o/p buttons or the Number buttons to select the channel to be recorded.

6

Press the RECORD button once to start recording. The REC(ord) light will appear. If the tape is missing the record tab, the VCR will eject the tape.

7

To pause the recording (for example, during commer- cials), press the PAUSE/STILL button once. The REC(ord) light will flash.

To resume recording, press the RECORD button or the PAUSE/STILL button again. The REC(ord) light will appear.

8

Press the STOP button to stop recording.

1Turn on the TV.

2 Insert a tape.

3

POWER

 

VCR/TV

EJECT

5

 

1

2

3

 

 

4

5

6

 

 

7

8

9

CHANNEL

 

4

 

0

+100

 

 

SPEED

RENTAL

AUTO

CLOCK/

 

SELECTOR REPEAT

COUNTER

 

 

 

MENU

DISPLAY

EXIT

COUNTER

 

 

 

 

RESET

MEMORY

7

6

REWIND

/ PLAY

F.FWD

RECORD

 

/ STOP

PAUSE/STILL

 

 

8

Helpful Hints

Other recording options are on pages 25 - 32.

The VCR will record in a preset vol- ume.

Pause mode will automatically switch to Stop mode after five min- utes to protect the VCR and the tape from damage. When a record- ing is paused, you may review the time remaining with the ■ marks on-screen. Each ■ mark equals one minute remaining. During the last minute of paused recording, the ■ mark will flash.

If any menu is activated on the TV screen, the RECORD button on the remote control does not function.

Press the COUNTER RESET/EXIT button to remove the menu. Then, press the RECORD button.

Page 24
Image 24
Philips SVZ122 Recording, Helpful Hints, 1Turn on the TV 2 Insert a tape, Other recording options are on pages 25