Philips SVZ122 owner manual Real-Time Counter Memory, Helpful Hints

SVZ122(H1680).QX33 4/6/99 9:42 PM Page 36

36 Real-Time Counter Memory

Follow the steps below to reset the real-time counter to zero at a tape location you want to refer to later. Make sure:

●The VCR is on and is in VCR position. The VCR/TV light will appear. If it does not, press the VCR/TV button once.

●There is a tape in the VCR.

1

Play, fast forward, or rewind a tape to the location that you would like to refer to later. Press the STOP button to stop the tape.

2

Press the COUNTER RESET/EXIT button to reset the real-time counter to zero.

0 : 00 : 00

3

Press the COUNTER MEMORY button so that M appears on-screen beside the real-time counter.

M 0 : 00 : 00

4

To go to a tape location where the real-time counter was reset to zero, press the REWIND button or the F.FWD button when playback is stopped.

When the tape reaches the point at which the real-time counter was reset to zero, the tape will stop.

Press the PLAY button to watch the tape.

POWERVCR/TV EJECT

	1	2	3
	4	5	6		2
	7	8	9	CHANNEL
		0	+100
	SPEED	RENTAL	AUTO	CLOCK/
		SELECTOR REPEAT		COUNTER
					3
	MENU	DISPLAY	EXIT	COUNTER
4			RESET	MEMORY
	REWIND	/ PLAY		F.FWD
	RECORD		/ STOP	PAUSE/STILL

1

Helpful Hints

•You may only set the real-time counter memory at one location at a time. If you set the real-time counter to zero at a second loca- tion, the previous real-time counter to zero setting will be erased.

•To erase the real-time counter memory, press the COUNTER MEMORY button repeatedly so that the M disappears from the screen.

•The COUNTER MEMORY button does not function if AUTO REPEAT is set to [ON].